Factors that drive organizational change Essay

Organizational change is defined as change that has an impact on the way work is performed and has a significant effect on staff. (The Vector study, 2012). Organizational change can be major like a reorganization or a much smaller change such as new computer software. Changes can include structure within the organization, working practices that include hours and schedules, role changes, and the environment within which work is done. Whether change is viewed as large or small it can affect production, employee satisfaction, and profits. When an organization faces decisions that may cause change, the leadership must have a vision of the objective. In order for change to happen, the entire organization needs to share a vision of a desirable future. Today there are many reasons for change in an organization. One major factor is technology. The technological advancements in business resulted in frequent changes and more are coming. Organizations use technology to look for ways to make things easier and less costly. In an ever-changing global economy the demand for higher services and quality place pressure on an organization, implying that change is a constant way of corporate life. Businesses want results and the addition of the Internet, web meetings, and  cell phones have created an environment of instant results. Technology has advanced business needs to unimaginable heights. With changes, though, comes implementation. These changes are not easy and will affect the team members. Management has to be on top of the newest developments and decide how best to use them. Leadership must implement strategies that will help the entire organization see the vision they have for the company and why this change is necessary for progress. For an organization to be successful in leading change it is essential that members are of the same mind-set and share the sense that change will lead to progress. Teams leading change must be credible and committed to the change process. Possessing the skills necessary and the ability to guide others is crucial to success. Failing to do so leads to market share and profit loss. Shareholders lose confidence in senior management and the loss of key employees can perpetuate an unstable environment. The economic and social forces such as globalization, social/culture, political/legal, competition, technology, liberalization, deregulation, unstable financial market and advancement in information technology have made and continue to make the business environment dynamic in all operating aspects. Competition is another factor of organizational change. A small business may find themselves directly competing with a large chain store or a United States manufacturing firm may have competition from other global organizations. No matter the size or span of a business, competition will lead to change. Most organizations today face a dynamic changing environment. These companies have two choices; change and grow or stay the same and fail. Organizations that learn to change and adapt to these changes ultimately survive. Merger and acquisitions are often a result of change. One company could not or did not adapt to the changes in the environment and became vulnerable; or they made aggressive changes and became more desirable as an asset than a competitor. This is how I find myself in my current job. In 2001 I was employed by a small Bio-tech company that developed and sold an innovative piece of medical equipment. This company was growing faster than anticipated and the market for this product exceeded expectations. It was a very exciting time. In the medical device industry there is always talk of acquisitions and no organization is immune to the rumors. As the  talk of our small company being bought by one of the big Bio-tech companies in our industry grew, so did the uncertainty. The effects of mergers and acquisitions on employee morale can be significant, (Richards, 2013) and my company and fellow employees were no exception. There was an announcement made, and we were acquired by another much larger company. Change is often difficult and how this was going to impact our jobs was the biggest concern for most. Who would still have a job and how was that job going to change based on our new environment were the questions being asked. The key to this successful merger of two separate sales teams was communication. The communication was critical to eliminate fear and explain decisions. The leadership worked diligently to provide us with as much information regarding the upcoming steps and who would be handling each one. They shared as much of the strategy as they could legally and handled every question effectively and honestly. When two organizations come together in a situation as this, there are many changes to deal with. Each member of our team was given the choice to apply for a position within the new company or take a severance package. Some felt safer with the severance and left, but many of us interviewed for our positions with the new company. We met in a central location and were interviewed by three teams; sales, human resources and, marketing. Not knowing if and how many of us would ever work together again was an additional stress. Waiting for the call, to see if I had a job was stressful, but so was meeting and joining a new group. As in any organization change there were concerns, conflicts and, perceived losses. Fear of change can impact productivity negatively and resulted in some to seek other opportunities. Fortunately for me though, things have worked out well. Stress and fear of job changes can cause competition within an organization. Senior leadership was doing their best to stay alert to signs of negative competition and keeping both groups informed of the changes and what impact this would have on each individual’s job. Competition is good but if it creates stress and conflict it can be detrimental to an organization. References The vector study. (2012). Retrieved from http://vectorstudy.com/management-topics/organizational-change Richards, L. (2012). The effects of mergers and acquisitions on employee morale. Small Business, (), . Retrieved from http://smallbusiness.chron.com/effects-merger-acquisition-employee-morale-3196.html

Fractional Distillation Process

HEALTH, SAFETY AND ENVIRONMENT (CBB 2012) TITLE: FRACTIONAL DISTILLATION PROCESS ? CONTENTS 1. Title†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 1 2. Summary†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 3 3. Introduction of Case Study†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 4 4. Risk Scenario Development†¦Ã¢â‚¬ ¦. †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ 5 5. Justification of Fault Tree Analysis†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦6 6. Procedures o f Fault Tree Analysis†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.. 7 7. Fault Tree Analysis†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦8 8. Possible Risk Associated with Hazards†¦. †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ 11 9. Accident Consequences†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 13 10.Method to Control the Risk†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ 15 11. Solution to Minimize the Risk†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.. 17 12. Conclusion†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢ € ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 18 13. References†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. 19 ? SUMMARY Crude oil is one the most important non-renewable sources on Earth. Demand for this black viscous liquid is growing every day in this era if modern technology. Electricity, vehicles and synthetics are among the major consumers of petroleum fluids or crude oil. Crude oil could be referred to as the ‘black gold’ due to its expensive price and complicated production process.Unlike gold, crude oil naturally is useless in its primary form. A process called fractional distillation or petroleum refining need to be carried out onto the crude oil to separate it into various components which later could be used to supply electricity to residential houses or mobilizing vehicles. Fractional distillation or petroleum refining is the process of separating crude oil into different components based on their hydrocarbon chains. It is one of the most important major processes in the oil and gas industry.Basically there are two types of fractional distillation which are in laboratory fractional distillation and industrial fractional distillation. Both have different method of conducting the process but utilize the similar concept. Industrial petroleum refining involves the separation of different length of hydrocarbon chain into specific refinery column which will produce products such as petrol, naphtha, kerosene and diesel. However petroleum refining has its own hazards and risk. It is highly flammable and could cause a major catastrophe to the plant.The purpose of this report is to study a case scenario involving the fractional distillation process and its potential hazards and risks. INTRODUCTION In 1859, the petro leum industry began with the successful drilling of the first commercial oil well and the opening of the first refinery to process the crude into kerosene. The development of petroleum refining from simple distillation to today's sophisticated processes has created a need for health and safety management procedures and safe work practices.Refining is the processing of one complex mixture of hydrocarbons into a number of other complex mixtures of hydrocarbons. In response to changing consumer’s demand for better and different products, petroleum refining has evolved continuously. The original requirement was to produce kerosene as a cheaper and better source of light than whale oil. The production of gasoline and diesel fuels resulted from development of the internal combustion engine. Nowadays, refineries produce a variety of products. It was soon discovered that high quality lubricating oils could be produced by distilling petroleum under vacuum.For the next 30 years kerosen e was the product consumers wanted due to two significant events, first is invention of the electric light decreased the demand for kerosene and second, invention of the internal combustion engine which created a demand for diesel fuel and gasoline, also known as naphtha. Most of our modern lifestyle depends on oil. The largest oil refinery is the Paraguana Refining Complex in Venezuela, which can process 940,000 barrels of oil each day. Samuel M. Kier was the first person to refine crude oil and he used the flammable oil produced by his salt wells to light his salt works at night.The burning crude produced an awful smell and a great deal of smoke. In 1850, Kier started experimenting with distillation and his refining experiments were successful and by 1851, Kier produced a product called Carbon Oil, a fuel oil which burned with little smoke and odor. By the end of the 1860s, Samuel M. Kier spent a great deal of his life trying to make crude oil useful and valuable and along the way he gave birth to the U. S. refining industry. A report based on fractional distillation or petroleum refining as a case study is used to determine the hazard and risk involve in the manufacturing process.Therefore, safety precautions could be taken when countering an accident. RISK SCENARIO DEVELOPMENT Risk may be considered as the potential or adverse effects to human health or equipment loss resulting from an activity or event if exposed to a hazard. A risk scenario is an important concept before conducting a risk assessment. Based on the case study stated previously, a risk scenario involving petroleum refining processes will be developed in case of emergency situation during which time a certain procedure need to be followed to prevent any accident from happening.There are various compartments in petroleum refining process. Instead of investigating a particular component which indicates specific process at a time, this report will generalize on all components involve in crude o il distillation. Petroleum refinery involved closed processes. Two categories of risks will be pointed out which are pollution risk and hazards risk. Pollution risk includes the release of chemicals into the atmosphere which could affect human’s health living near the refinery plant.Apart from air pollution impacts there are also wastewater concerns. Wastewater is liquid waste discharged by domestic residences, commercial properties, industry agriculture which often contains some contaminants that result from the mixing of wastewater from different sources. Improper wastewater treatment could pose health problems to human. Noise pollution could also serves as a potential source of pollution due to industrial noise which could cause disturbance to residential area near the plant. Hazard risk involves explosion, fire and corrosion.Heaters and exchangers in the atmospheric and vacuum distillation units could provide a source of ignition. Besides that, there is a potential for a fire to exist should a leak occur within the refinery. Wet hydrogen sulfide will cause cracks in steel which could leads to leak. The main hazard risk is corrosion which is a chemical hazard. Sections of the process susceptible to corrosion include preheat exchanger and hydrogen sulfide, preheat furnace and bottoms exchanger and atmospheric tower and vacuum furnace.Efficiency in petroleum refinery is very crucial to reduce the cost of maintenance. Corrosion could cause efficiency decrement and the failure of equipment as well as interrupting the maintenance schedule of the refinery during which time all of the component must be shut down. Maintenance related to corrosion in the refinery is very costly and could reach up to billions of dollars. JUSTIFICATION OF FAULT TREE ANALYSIS Fault tree analysis (FTA) is used to analyze the case study. FTA is a failure analysis technique and it involves examining preceding events leading up to a system failure.The tree starts with the accident e vent and working backwards through time, breaks it down into a series of contributory events that are structured according to certain rules and logic. This process of breaking down the event to identify contributory causes and their interaction continues until the root causes are identified. The logic diagram displays the various logical combinations of failures that can result in an accident. Advantages of Fault Tree Analysis 1. Easy to read and understand. 2. Can handle multiple failures or combinations of failures. 3.Exposes the needs for control or protective actions to diminish the risk. 4. Quickly exposes critical paths. 5. The results can provide either qualitative or quantitative data for the risk assessment process. 6. Directs the analyst deductively to accident-related events. 7. Useful in investigating accidents or problems resulting from use of a complex system. 8. Excellent for ensuring interfaces are analyzed as to their contribution to the top undesired event. Weaknes ses of Fault Tree Analysis 1. Though fault trees may reveal human error, they do little to determine the underlying cause. 2.Fault trees require detailed knowledge of the design, construction and operation of the system. 3. Not suitable for assessing normal operations. 4. Fault trees may become very large and complex. 5. Significant training and experience is necessary to use this technique properly. Once the technique has been mastered, application stays time-consuming however commercial software is available. 6. Is not practical on systems with large numbers of safety critical failures. PROCEDURES OF FAULT TREE ANALYSIS 1. Identify a specific component that is to be analyzed. This will be placed at the top of the tree, in its own individual box. . Next, all the faults that are to be found within the component need to be identified. This can be done through brainstorming to identify the failures. 3. Faults each have their own box below the component. It is now necessary to work thr ough why the faults have occurred. What were the causes? What actions resulted in these faults being created? 4. All the causes for the faults need to be identified and then set out in boxes, each one linked to the faults that are listed. 5. It is necessary to determine the root cause for each fault which may require listing several factors that contribute to the accident.Therefore we could decide which factor that can be controlled and altered so that the fault could be avoided. Root causes are then linked to the general causes. 6. Identify countermeasures. Once all the causes and the root causes have been identified, countermeasures need to be listed. These are the antidotes to the root causes and will ensure that the faults are eliminated. Countermeasures are then linked onto the root cause boxes, because they show the actions that need to be taken. 7. There are two types of gates used in a fault analysis tree : a.AND: where all the sub-faults and the other causative factors must co-exist so as to cause the fault for which they have been identified. b. OR: where the fault will occur even if only one of the sub-faults or the basic factors exists. ? FAULT TREE ANALYSIS In process of assessing and identifying the risks in a work environment, hazard analysis is the initial step to be taken. These are the types of hazard analysis: (i)Hazard & operability review (HAZOP) (ii)Failure mode & effect analysis (FMEA) (iii)Technique of operation review (TOR) (iv)Fault tree diagram (FTA) v)Human Error Analysis (HEA) (vi)Risk Analysis In our case scenario of the risk involving crude oil distillations processes, hazard analysis method that has been used is fault tree analysis (FTA). Definition of Fault Tree Analysis Fault tree analysis is a graphical representation of the major faults or critical failures associated with a product, the causes for the faults, and potential countermeasures. The tool helps identify areas of concern for new product design or for improvement of existing products. It also helps identify corrective actions to correct or mitigate problems.Importance of Fault Tree Diagram FTA is the most suitable hazard analysis as it is useful both in designing new products/services and in dealing with identified problems in existing products/services. In the quality planning process, the analysis can be used to optimize process features and goals and to design for critical factors and human error. As part of process improvement, it can be used to help identify root causes of trouble and to design remedies and countermeasures. Figure 3: Fault-Tree Analysis diagram GRAPHIC SYMBOLS FOR FAULT TREE ANALYSIS EVENT SYMBOLFunction: It is divided into two:- primary and intermediate events †¢Primary events are not further develops one fault tree †¢Intermediate events are found at the output of a gate. GATE SYMBOL Function: It describes the relationship between input and output event Basic Event It is the failure or error in a system compone nt or element. OR gate The output occurs if any of the input occurs Intermediate event Can be used immediately above a primary event to provide more room to type the event description, and also as an output of any gate AND gate The output occurs if both of the input occurs POSSIBLE RISKS ASSOCIATED WITH HAZARDS Since the process of fractional distillation undergoes the separation of the fractions are further converted using processes such as ‘cracking’ or ‘catalytic reforming’. Flammable hazards are therefore likely to be represented by many substances on a typical petrochemical refining plant. According to the Encyclopedia of The Earth, even though these are closed processes, heaters and exchangers in the atmospheric and vacuum distillation units could provide a source of ignition, and the potential for a fire exists should a leak or release occur.In order for gas to ignite there must be an ignition source, typically a spark (or flame or hot surface) and o xygen. For ignition to take place the concentration of gas or vapor in air must be at a level such that the ‘fuel’ and oxygen can react chemically. The power of the explosion depends on the ‘fuel’ and its concentration in the atmosphere. The relationship between fuel/air/ignition is illustrated in the ‘fire triangle’. Gases and vapors’ released from crude oil refining processing activities cause harmful effects on workers exposed to them by being absorbed through the skin, inhalation or swallowed.People exposed to harmful substances may develop illnesses such as cancer many years after the first exposure. According to Halma India News (2009) many toxic substances are dangerous to health in concentrations as little as 1ppm (parts per million). Like an example, given that 10,000 ppm is equivalent to 1% volume of any space, it can be seen that an extremely low concentration of some toxic gases can present a hazard to health. The flammable g as hazards occur when the concentration of gases or vapors exceed 10,000ppm (1%) volume in air or higher.Furthermore, toxic gases typically need to be detected in sub-100ppm (0. 01%) volume levels to protect personnel. Gaseous toxic substances are very dangerous because of their invisibility and odorless. We cannot predict their physical behavior that can influence the properties of a gas leak. Hydrogen sulphide for example is particularly hazardous; although it has a very distinctive ‘bad egg’ odor at concentrations above 0. 1ppm, exposure to concentrations of 50ppm or higher will lead to paralysis of the olfactory glands rendering the sense of smell inactive.This in turn may result in the assumption that the danger has cleared. Prolonged exposure to concentrations above 50ppm will result in paralysis and death. An excursion in liquids, pressure and temperature levels may also happened if automatic control devices undergo failure. The sections of the process that might be exposed to corrosion include, preheat exchanger, preheat furnace and bottom exchanger, atmospheric tower and vacuum furnace, vacuum tower, and overhead. It will also give crack in steel with the presence of H2S. The nitrogen oxides can form in the flue gases of furnaces when processing high-nitrogen crudesACCIDENT CONSEQUENCES According to European Agency for Safety and Health at Work (n. d) emphasized the employer should think about safety at the workplace because the employer are obliged by law to maintain a safe and healthy workplace. Besides that, most employers have a personal interest in guaranteeing the safety of their employees. In addition, the employee is responsible to think about safety at workplace. Accidents are an inevitable part of a job. However injuries not only cause loss of money but also cause pain and disruption to the workers and their family.Actually they should know that working safely is part of their future life. Safety and health at the workplace is t he responsibility of both employers and employees. European Agency for Safety and Health at Work (n. d) also said that a workplace accident is an injury or illness that occurs in relation to an employee's job. Usually injuries occurs among workers resulted from an accident while performing duties and tasks. Through the Occupational Safety and Health Administration (OSHA) as it is commonly referred to Federal law provides employees with protection while working in a safe environment.OSHA has enacted a set of rules and regulations that must be abided by all employers and as an alternative, the law also provide compensation for workers who have illness or injuries. David Greenberg Law (2012) explained a workplace accident that causes injury happens because of unsafe working conditions, defective equipment, lack of maintenance or a dangerous environment. There is a possibility for a worker to have the carpal tunnel syndrome due to jobs that required physical strain such as heavy lifting , working with hazardous materials or prolonged time in certain jobs such as typing.Many factors could causes psychological illnesses such as stressful environment, discrimination or harassment, a motor vehicle accident occurring in the performance of job related duties, an injury caused by unsafe conditions or equipment and a slip and fall at work. Being injured at work has serious and sometimes permanent and irreversible effects on its victims and their families. The pain and suffering endured is not usually covered in worker compensation plans. If an accident happened, attorney from the law firm should be consulted before taking any other actions.A workplace accident lawyer is best prepared to evaluate your particular situation and recommend the best course of action for you and your family. The workers bear about 30 percent of the total costs of workplace injury and illness. These costs include, but may not be limited to; loss of income, pain and suffering, loss of future earnin gs, past investment, and medical expenses. The problems created by an injury may provoke a necessity to shift to other jobs, retrain for other careers, and complete disability (handicap).In addition, injured employee will face financial loss as a direct result of their injuries. Besides that injury or illness put a strain on relationships in a number of ways through emotional stress, financial pressure and isolation. Family and friends are deeply impacted and this eventually may lead to problems within their relationship. The injury or illness may result in a breakup or in a temporary or permanent loss of intimacy. Attitude and response received from employers, colleagues, supervisors, and others within the workplace could affect the psychological health during the physical recovery process.The workers had to bear the risk that they need to change their lifestyle related to the injury where they and their families will endure costs, monetary losses. If you or a family member has bee n injured in the work place you should consult a law firm with workplace accident attorneys. ? METHOD TO CONTROL THE RISK After identifying the hazards in the industries we need to figure out a method to control the risk and therefore lower the chances of any accidents to occur. Some of the method we have managed to find is; Hierarchy of Controlling the RiskTo reduce the risk of a hazard occur during event is operated; the hierarchy of control should be used. The hierarchy represents the order of controls that need to be considered when selecting methods of controlling a risk from highest to lowest order control measure. The sequence of the hierarchy control is as below: i. Elimination of the hazards: -By getting rid of anything that can be related to the hazards such as equipment or substance completely but the elimination cannot cause the event become less effective to be operated. ii. Substitution with lesser hazard: By replacing the hazardous material into a lesser hazardous mat erial. iii. Using engineering controls: -By redesign the hazardous material or the work processes. iv. Isolation of the hazard: -By separating the operator and the processes that being done with, such as physical barrier, or set a range of distance between the operator and the processes conducted or even by forming a hazardous area. -Example: providing a sealed cage area for fireworks. v. Using administrative controls: -Known as policy, procedure or behavior control such as time and hours of work, how to conduct the process and who can work at the specific area. By enforcing and applying the policy or the safe procedure that had been set. -Example: provide training in the work procedures and work processes. vi. Using personal protective equipment (PPE): -Last order of control in hierarchy of control. -Type of clothing or equipment or substance that can protect the operator from the hazard. However it is not highly recommended as it is not 100% guaranteed to be safe from the hazard. -Example: hearing protection, gloves, masks, hats, high visibility vest. Applying the hierarchy of controlling the risk is not enough to reduce the risk at the work place.Therefore, other method needs to be implemented in order to create a truly safe workplace. System improvement Reduce or eliminate the possibility of a chemical release by choosing inherently safer materials and technologies. Besides that, reducing the potential severity of the impacts of a chemical release through mitigation measures (containment dikes, sprinkler systems) or emergency response plans should be carried out. Maintenances Maintenances need to be done regularly to spot any deformation or cracks in the distillation machine.This can be done by creating a comprehensive schedule for maintenances so the machine is always working in its best condition. It is also important to make sure that the person who is in charge of the maintenance follow the schedule tightly to avoid any errors and future accidents from happening. ? SOLUTION TO MINIMIZE THE RISK Controlling of pressure, temperature and liquid levels are among the important criteria that must be taken into consideration in order to find the solution that might minimize the risk of chemical hazard in fractional distillation processes.If automatic devices fail, an excursion could occur. We need to control devices within the operating parameters to prevent thermal cracking from happening in the distillation towers. To prevent unwanted crude from entering the reformer change, relief systems should be provided for overpressure and monitoring operations. There are some sections of the process that could easily be affected to corrosion include, preheat exchanger, preheat furnace and bottoms exchanger, atmospheric tower and vacuum furnace, vacuum tower and overhead.When the metal temperatures exceed 450? F, some corrosion might be happened in furnace tubing and in both atmospheric and vacuum towers. This is the place where sour crudes are processed. Wet hydrogen sulfide also will cause cracks in steel. Nitrogen oxides are very corrosive with the presence of water at low temperature. Nitrogen oxide is produced from the flue of gases furnace during high-nitrogen crudes processing. We can take initiative from chemicals such as hydrochloric acid to control corrosion that produced in distillation system.This is one of the solutions to reduce the chemical hazards. An alkaline solution such as ammonia may be injected into the overhead streams or feeding hot crude-oil to initialize the condensation process. However, usage of ammonia must be accompanied by enough supply of water. If not, ammonia chloride will be deposited which could cause severe corrosion. Appreciable amounts of water may contain in the crude feedstock that can be heated until boiling point and cause vaporization explosion when in contact with the oil in the unit. ? CONCLUSIONThis report is about potential sources of hazards in a working environment. The cas e study chosen is related to the Oil and Gas industry which is entitled ‘Fractional Distillation’. Fractional distillation is used for separating a mixture of substances with narrow differences in boiling points and it is the most important process in the oil and gas industry. Based on this report many hazards might happen in the refinery processes especially hazards related to chemicals. Therefore chemical hazards are chosen as the main hazards in the case study.Fault tree diagram is used to conduct the hazard analysis. This method is a graphical representation of the major faults or critical failures associated with the product, causes for the faults and potential countermeasures. It helps to identify corrective actions to correct or mitigate problems. This type of analysis can be used to optimize fractional distillation process features and goals and to determine critical factors and human error in the oil and gas refinery industry. Hence, we can find the solution fo r these problems if an accident occurs.As a conclusion the chemical hazards could occur due to ignition or fire that is produce from a leakage or cracks inside the distillation units. Should an accident occur, employers must think and react quickly to contain and control the situation. Employees on the other hand need to be alert all the time about the safety condition at their workplace. Adequate rules at workplace are setup by several organizations such as European Agency for Safety and Health at Work, Occupational Safety and Health Administration (OSHA) and David Greenberg Law to increase the awareness of workers toward safety.The solution were taken in order to minimize the risk is to stop the sources of accident which are leakage and corrosion. By using alkaline chemicals, the corrosion process of the distillation unit wall could be controlled thus reduce the number of accidents. ? REFERENCES Bastidas,L. M. (March 12,2012) . Fractional Distillation of Crude Oil. Retrieved Augus t 11th, 2012 from http://wiki. nanjingschool. com/users/laurencemclellanbastidas/weblog/87653/Fractional_Distillation_of_crude_oil. html Fault Tree Analysis. Retrieved August 12th ,2012 from http://www. hf. faa. gov/workbenchtools/default. spx? rPage=Tooldetails&subCatId=43&toolID=120 Freudenrich,C. Howstuffworks â€Å"How oil refining Works. Retrieved August 10th ,2012 from http://science. howstuffworks. com/environmental/energy/oil-refining4. htm Gas Hazard in Petrochemical Industry. (July 2009). Retrieved August 11th, 2012 from http://halmapr. com/news/india/2009/07/03/gas-hazards-in-the-petrochemical-industry/ Health and Safety Aspects of Petroleum Refining. (October 31st,2008) Retrieved August 12th, 2012 from http://www. eoearth. org/article/Health_and_safety_aspects_of_petroleum_refining#gen8 Kinyanjui,L.The Advantages and Disadvantages of Fractional Distillation . Retrieved August 11th ,2012 from http://www. ehow. com/info_8513450_advantages-disadvantages-fractional-distilla tion. html Making crude oil useful. Retrieved August 10th ,2012 from http://tfscientist. hubpages. com/hub/making-crude-oil-useful-fractional-distillation-and-cracking Pearsonlongman. com. Retrieved August 10th ,2012 from http://www. pearsonlongman. com/technicalenglish/pdf/level2/level2_unit8. pdf Ritcher,L. Fault Tree Analysis Template in Excel. Retrieved August 12th ,2012

Consumer Making Decision & Behavior Term Paper Example | Topics and Well Written Essays - 2750 words

Consumer Making Decision & Behavior - Term Paper Example When two friends were passing by and saw the stage and the burnt up wall, one of the passersby turned to her friend, asking her if she could see that the Maxima was so hot that it had burned through the wall. Responding to this comment, the prop master, Daryll Merchant, said that that was the whole concept of the advertisement. According to the executive creative director of True, Christopher Davis, people nowadays don’t say ‘cool’ anymore as it is almost uncool to say it, whereas ‘Hot’ is the new vernacular. The Maxima campaign was aimed at selling the idea of hotness. The pieces of the ‘Hot’ campaign were striking. At each site, the fences of parking lots were temporarily removed to make way for the car-ravaged wall that had a built-in steam engine. The wall was watched by two security guards. The advertisement was deconstructed every four days at 5:30 am and was put in its new location. The holes that were left from bolting the props d own were filled with concrete (Yuan 2005). The response from the street campaign was strong. An example of this strong response was when one bus driver pulled over the bus with people in it and took a picture of the ‘Hot’ Maxima, while someone else called 911. The best compliment that the Maxima street campaign got was that from a passerby who without any prompting, remarked saying ‘Wow, that is hot!’The director of Nissan Marketing, Fred Suckow, was hoping that their unique integrated campaign would reach beyond traditional marketing. The intention of the Maxima street scenes was to engage all the senses of the consumers. The street scenes were intended to grab the attention of the onlookers in the busy metro areas as well as bring to life the ‘Hotness’ campaign and the essence of the Maxima. The customers who had a Maxima would be perceived as ‘hot’ and a little different from everybody else. Nissan targeted people who had a desi re to fit in.  Ã‚  

Why United States Flag Burning is Wrong Essay Example | Topics and Well Written Essays - 500 words

Why United States Flag Burning is Wrong - Essay Example They often use flag burning as a manner of protest in order to demonstrate the intensity of distaste that the harbor for various issues in America. Nevertheless, the flag is a part of America and an attack on it should be viewed as an attack on the country. While there have been various decisions by the US court system that both criminalize and allow for this shameful activity, the fact of the matter is that flag burning should be against the law. There was a case on flag burning in Texas that reached the Supreme Court. In Texas v. Johnson (1989), Johnson had been convicted for his crimes by the Texas court system. The flag has been burned as a way of protest during a march that had been held to express dissatisfaction with some of President Regan’s policies for corporations (Texas v. Johnson, 1989). In Texas, at that time, burning the American Flag was against the law. Nevertheless, the Supreme Court found that any law which restricted flag burring violated the First Amendment (Texas v. Johnson, 1989). Flag burning has been against the law at the federal level due to the Flag Protection Act of 1968, and many state and local governments held such laws as well. However, as a result of this case, the federal, state, and local governments could no longer uphold these laws. Then, in 1990, there was another case that dealt with flag burning. With the case of U.S. v. Eichman (1990) the flag burning parties had to be released . Time and time again, cases have been presented to the Supreme Court that sought to address the issue of flag burning. Yet, those who have been found guilty of flag burning have gotten away with it. This is not because the Supreme Court believes that it is okay to burn the flag, but because they have found it difficult to make flag burning against the law without violating the First Amendment, which states, â€Å"Congress shall make no law†¦abridging the freedom of

The Use of eBooks in the Educational Process at Schools and Colleges Research Paper

The Use of eBooks in the Educational Process at Schools and Colleges - Research Paper Example This technological transition has seen the emergence of the E-books which is a system in which an entire book is stored in a soft copy. They have to be stored in a computer and can be accessed at any time through the internet. The devices used to access the e-books are referred to as the e-readers. The use of e-books has earned global fame since it is accessible through the internet which has transformed the world into a global village. The emergence of this form of technology has been so rampant in the market to the extent that those companies dealing in books and ignored its usage have found it hard to survive in the markets. (Matthews 54) Borders Books in the United States of America is a perfect example of the importance of the use of e-books. The company went out of business because electronically sensitive companies emerged. These companies, Amazon and E bay forced them out of business. Amazon’s operations are centered on the Linux operating system. This has enabled the corporation handle the wide customer base. Another advantage of technology in business is that it has ensured the security of customers and the company since information is well secured. E-commerce strategies used by modern companies has enabled customers transact regionally, internationally or even globally. The usage of e-books has even grown further across the globe thanks to its ‘question and answer sections’ which users find very sufficient as they are able extract the information they need without searching for too long. Most e-books are designed in a PDF format since it is the most common format across the globe. This drive is aimed at ensuring that as many people as possible across the world are able to access the e-books. The future of e-books look promising due to the overwhelming reception it has received globally. The existence of search engines such as the one availed by Google also contribute significantly to the growth of e-books as they enable people to find the e-books of their choice from the internet with much ease. Competition among the firms dealing in e-books also ensures its continuity as new products keep emerging by the day. E-books can be read from the internet or be downloaded to be read later. The use of e-books has also been boosted a great deal through their endorsement by prominent personnel in the society. These persons are known to greatly influence the tastes and preferences of many in a society. For instance, Oprah Winfrey once claimed that the emergence of the e-books was her most favorite form of invention as it enabled her to become a good reader which she said she was not before. This virtually convinced people that this was a great form of invention and many gave it a try. (Swedberg 112) The emergence of every form of invention has always come with its merits and demerits and e-books is not an exception. However good or productive an invention may be, it always comes with its negative side effects even if it is of the slightest magnitude. E-books are however observed to bring with them more advantages than disadvantages. Some of the advantages of e-books include: e-books come in various forms such: written form, image form, audio form and video. This gives e-books an edge over the hard copy books as those users who do not fancy reading can opt to use the video or audio forms of e-books. This way it also makes it possible for the

Illustration Essay Example | Topics and Well Written Essays - 1000 words

Illustration - Essay Example It is in this role, that graphic designing has gained importance. What once began as the artist's job with hand painting, went over to screen printing and has today reached the desktops of millions of visualizers. Amongst the various elements of graphic design, the art of illustration is interesting and rather challenging. Thus while words need to be read, illustrations can capture a million words in a single expression. This is because they capture and combine photography and art in an appealing and attractive manner. As we pointed out before, illustrations have been with us since the advent of mankind where they took the shape of cave paintings. Woodcut illustrations became popular in the 15th century, followed by lithography in the 18th century. In the early 19th century, journals became popular for mass circulation and illustration gained new meaning. Soon wood engraving was preferred over steel engraving to incorporate illustrations in the pages. However what was a mere painter's mindscape, evolved to touch more people with the advent of advertising. During the 20th century, many graphic designers were also illustrators of high repute and the art was viewed with great reverence, some considering it greater than graphic design. Many illustrators would even sign their work and many enjoyed great fame. Gustavo Dore was a renowned figure in those times. Today the modern illustrator has with him various new software to assist the design process. Most training institutes also encourage that the ill ustrator uses both traditional and modern techniques to recreate the image in his mind on paper. Today there are many associations that bring together illustrators. These include the Association of Illustrators (AOI), Society of Illustrators and Society of Children's book writers and illustrators. Various awards are also handed out every year to support the efforts of these artists. New media Today illustrations benefit from a range of media. From print media like newspapers, greeting cards, books and magazines where these were commonly used, today the scope is much wider. Technologies allow for these to be used in movies, television shows and video games. With the advent of computers and the Internet, illustrations are also highly popular on web sites. Finally advertising has allowed for illustrations to be used on all its media spanning billboards, print advertising, television advertising and the Internet. Great works of great minds Illustration has been a popular form of art and communication with many great works being produced by great names like Andy Warhol, Roy Lichtenstein, Santiago Martinez Delgado etc. However in the current day scenario, works of two reputed illustrators are illustrated here. 28 year old Vladimir Dubko is one great name to reckon with in this scenario. At a time when many find the world of illustration distressing in the least, he created a niche for himself in fashion illustration, doing what every illustrator could only dream of in Italy. He experimented with diverse disciplines, obtained a grant at Fabrica (Benetton research center for communication) and worked with various young artists from across the world. While most of his work is

Principl Fetures of Budgeting as a Plnning and Control System Term Paper

Principl Fetures of Budgeting as a Plnning and Control System - Term Paper Example    OperÐ °tionÐ °l control - the process of ensuring thÐ °t specific tÐ °sks Ð °re cÐ °rried out efficiently Ð °nd effectively. It is Ð ° very short term Ð °ctivity for junior mÐ °nÐ °gemen Ð °nd Ð °ddresses their tÐ °rgets for dÐ °y to dÐ °y Ð °ctivity both finÐ °nciÐ °l Ð °nd nonfinÐ °nciÐ °l. There Ð °re substÐ °ntiÐ °l differences between strÐ °tegic plÐ °ns Ð °nd long-term budgets--both in how they Ð °re creÐ °ted Ð °nd in the end products. Very few orgÐ °nizÐ °tions reÐ °lly need Ð ° multiyeÐ °r budget. In fÐ °ct, for mÐ °ny orgÐ °nizÐ °tions, including community bÐ °nks, they cÐ °n sometimes do more hÐ °rm thÐ °n good. How they differ. The function of the budget is to mÐ °intÐ °in, protect, Ð °nd Ð °llocÐ °te the orgÐ °nizÐ °tion's resources. The strÐ °tegic plÐ °n prepÐ °res the bÐ °nk to mÐ °ke future decisions, enÐ °bling it to tÐ °ke Ð °dvÐ °ntÐ °ge of opportunities Ð °s they Ð °rise Ð °nd to Ð °void or lessen t he effects of Ð °dverse developments. The most importÐ °nt difference between the two is in the wÐ °y they influence the bÐ °nk's decision-mÐ °king processes. Community bÐ °nks hÐ °ve two choices: they cÐ °n reÐ °ct to chÐ °nges in the mÐ °rketplÐ °ce Ð °fter they occur, or they cÐ °n Ð °ct now to shÐ °pe the environment they will fÐ °ce in the future. In budgeting, such criticÐ °l issues Ð °re predetermined, either Ð °s finÐ °lized decisions or Ð °s Ð °ssumptions. CentrÐ °l to budgeting is the tÐ °sk of forecÐ °sting levels of loÐ °ns, deposits, Ð °nd revenue. But forecÐ °sting is relÐ °tively unimportÐ °nt in strÐ °tegic plÐ °nning. SimilÐ °rly, the relÐ °tionship between costs Ð °nd revenue generÐ °tion must be Ð °ssumed in budgeting. In strÐ °tegic plÐ °nning, such relÐ °tionships Ð °re Ð °t best Ð ° secondÐ °ry considerÐ °tion.   True strÐ °tegic plÐ °nning encompÐ °sses no such Ð °ttempt to predetermine decisions. InsteÐ °d, it provides Ð ° guide or frÐ °mework within which future decision mÐ °king will tÐ °ke plÐ °ce. It emphÐ °sizes longer rÐ °nge objectives, not so much in terms of specific finÐ °nciÐ °l performÐ °nce, but in terms of where Ð °nd how the firm will position itself with respect to customers, regulÐ °tors, employees, product types, technology, Ð °nd the community. For exÐ °mple, Ð ° bÐ °nk locÐ °ted in Ð °n Ð °reÐ ° where the demogrÐ °phics Ð °re chÐ °nging substÐ °ntiÐ °lly mÐ °y need to reposition itself by developing new products Ð °nd services Ð °nd corresponding outreÐ °ch efforts to meet the shifting needs of the community.  

Analyzing a building or architecture based on several questions, see Essay

Analyzing a building or architecture based on several questions, see them in the uploaded file - Essay Example The size of the arena is estimated by the seating arrangement which is 5,110 permanent seats with 7,610 moveable chairs. Dorton Arena is opened to various patrons or clients across a diversity of the world. For instance, in the earlier days it was a residence of various sports teams and presently is the residence of the Caroline Rollergirls Its plan constituents steel, cast iron, parabolic arches, ground and tiers underneath rigid chairs are concrete. The support-hanging roof is a grooved metal decking enclosed with a bonded ceiling cover, while the edge columns are concrete-encased steel. Windows are steel framed with painted, glare-reducing glass. Therefore the materials used widely for construction are steel and concrete. The purpose of the building was for multi-use but the initial intention was to be just a domestic animals exhibition area and later, in the finishing point, still, it was approved extended use, showing the current necessitate for flexibility in the plan of intern al venues. For example it was a perfect place for business shows, graduations, sporty events, circuses, speakers, and other special events. In addition to above events, the arena is also used for concerts during the North Carolina State Fair. ... It is therefore a multipurpose building. In view of the fact that the building is multipurpose, it serves several people in the world who are in different sector of production. Furthermore, it is at the interest of the North Carolina especially in the following sectors; farming, production, business and education The building’s function influences its design in that, the literary & aesthetic value of the building completely compliments the wants of the functions taking place indoors, in the view that the tent-like, weigh down formed roof measures the original use of extra bent delay form in a structural design. In this case, the tiered seating of the ground and the line of the roof increase in equivalent. Comparing to other buildings that serve the same purpose, Dorton Arena is the most likeable structure because of its services that it provides. Thus, agriculture, industry, and commerce but it has seen a mixture of other functions. In the 1970’s it hosted the American Basketball Association’s Carolina, Raleigh Ice Caps, a minor league hockey team, called Dorton its home from 1991 to 199. It is also specious and therefore accommodates many people than other buildings. It is again influencetial to the future designs. For instance, in 1957, the American organization of Architects acknowledged the arena as one of the top best structure most anticipated to persuade the expectations of American architecture. It was listed as a state famous headstone in 1972 and The National Park Service says the structure has been highly praised globally for its modern blending of design and engineering. It’s two-twisted parabolic arch plan, edge hold columns, and wire structure provides a clear view from anywhere indoors and the building's

Mental abuse in children Essay Example | Topics and Well Written Essays - 500 words

Mental abuse in children - Essay Example Mental abuse of children arises from a) rejection of a child; b) isolation and; c) verbal abuse or striking terror in a child. A child needs close association with his parents and other people who are around him. When he talks or looks at the eyes of the person who is at close proximity, he seeks the same thing to be reciprocated to him. Otherwise soon the child might starts to think that he is not important enough that he gets the same. If this continues and the child grows to adulthood, he might carry the same attitude towards others and mostly seems withdrawn from his surroundings. The seed of neglect that has been sown in his very childhood might compel to make him think that being so unimportant he deserves no attention at his adulthood as well. (Gardapee, 2011) Isolation of the child from his fellow members or from the others easily results in a loner kind of personality in his adulthood. This follows from the lack of socialization he was subject to during the formative period of his life. Touch carries an important aspect while developing trust with the child and if that touch is absent the child might well feel that he is not wanted or welcome to his parents. Once grown into adulthood, a psychological drawback will definitely follow suit where the child will feel that he is unwanted among his fellow members and at the worst to the greater society.