Immanuel Kant †Metaphysics of Morals Essay

In his publication, Foundations of the Metaphysics of Morals, Immanuel Kant supplies his readers with a thesis that claims morality can be derived from the principle of the categorical imperative. The strongest argument to support his thesis is the difference between actions in accordance with duty and actions in accordance from duty. To setup his thesis, Kant first draws a distinction between empirical and â€Å"a priori† concepts. Empirical concepts are ideas we reach from our experiences in the world. On the other hand and in contrast, â€Å"a priori† concepts are ideas we reach as an end point of reasoning prior to or apart from any experience of how things occur in the world. Kant then claims that moral actions are supposed done for the reason of morality alone. This train of thought leads to the conclusion that an understanding of morality must be based on â€Å"a priori† concepts of reason. Truly moral ideas are then universally valid if and only if they are based on â€Å"a priori† concepts. From this idea of â€Å"a priori† concepts, Kant begins his thesis with the notion that the only thing in the world that is a qualified good is the â€Å"good will†, even if its efforts bring about a not necessarily good result. A â€Å"good will† is good because of the willing that is involved. Two main implications arise with this idea of the â€Å"good will†. The first implication is moral actions cannot have impure motivations. There are many impure motivations but Kant tends to focus mainly on the motives of the pursuit of happiness and self-preservation. Second, moral actions cannot be based on the speculations of the probable results. This action is not good in itself but good because it brought about a more desirable outcome. Thus, Kant arrives at the conclusion that for an action to be considered to have genuine moral worth its motive must be that of dutifulness to moral law. In Foundations of the Metaphysics of Morals, Kant lays out three propositions about duty. The first is the will is a morally good action if it is done in accordance from duty, as opposed to an action done in accordance with duty. The second proposition is that actions are judged by the â€Å"maxim† or principle that was the motivation behind the action. If someone undertakes an action with the only motivation being that of a sense of duty, they are following a valid â€Å"a priori† action. On the other hand if they decide to undertake an action in order to bring about a desired result, then their motivation is one that is beyond mere duty. Kant’s third proposition then explains that is not the respect for the power of the law but rather it is the moral motivation of an individual who acknowledges that the law is an imperative of reason that trumps our other interests. The will, as Kant describes, is of practical reason. A rational being is an individual who has the capacity to execute their behavior by the conceptions of laws. This discipline of action is also known as the will. Our judgment that advises us on our action is known as an imperative or a command to act on a certain motive. An imperative can be either hypothetical or categorical. In the hypothetical imperative one acknowledges an action as right or necessary if it is a manner in which to obtain or achieve a certain goal. As such you would act on an action if a previous circumstance has taken place. These types of actions come from our previous experiences and counsel us to a way in which our desires can be achieved. Thus, an action cannot be held universally valid at all times if its goal is to acquire some objective of desire under a certain set of conditions. If the goal is ultimately happiness, we are unable to set any universally hypothetical imperatives for happiness. This is because the definition of happiness differs from person to person. One man’s happiness can very well be another man’s misery. As Kant explains, a binding moral law then cannot be equivalent or parallel to a hypothetical imperative. Pure reason comes from the ability to consider neither a motivating condition accompanying another nor its intended results. With that, we then need to find a principle with universal validity or a principle that is valid no matter what issue is being considered. â€Å"A priori† principles of reason are the only principles that fit this standard on which a judgment or decision may be based. Hence, Immanuel Kant formulates that a moral imperative is one that is an unconditional or categorical imperative. A categorical imperative is our moral consciousness to do our duty because we ought to do our duty instead of pursuing our own desires attached to the duty. Such an imperative is driven by pure reason. Because we exclude our desires or maxims, we need only to focus on the form of our imperative. The form needs to be universally applicable or valid for all rational beings to follow. Thus, Kant gives us only one categorical imperative and it is â€Å"Act only according to that maxim by which you can at the same time will that it should become a universal law† (Kant pg. 38). This universal law of morality states that we should act in such a way that we could will the maxim of our action to become universally applicable. This should be used as the criterion to determine whether or not a maxim is morally valid. Before we are able to apply a maxim to this categorical imperative, it is required that the maxim first, be fit to be a law of nature and second, is based on a notion that all actions have ends. The second pertains to the idea that men and women are ends in themselves. No maxim that does not impose or imply respect as a necessary accompaniment for men and women can be a moral law valid for everyone. Third, we must see every rational being as able to make universal laws. Last, the maxim requires the moral agent to act as a lawgiving member of all persons. From these points, two important ideas arise. The ideas deal with the autonomy of the will and dignity of the individual. Each person is essentially their own lawmaker, obeying the laws that they give themselves as a rational being. A person is not bound to a law by fear or hope of some reward, but freely bound to it by their lawgiving ability. This moral will is autonomous. Autonomy, which means self-law, is the only way Kant believes an individual to achieve the ultimate freedom. If an individual obeys laws from some other lawgiver, such as God and government, because of fear of punishment or hope of reward, he or she is not truly free. I feel the strongest objection to this thesis is Kant does not take enough consideration to human beings natural emotions. I believe his thesis weighs to heavily on mere reason alone without any emphasis on the emotional component of our morality. Kant’s perception that morality is a chore neglects the fact that by performing actions from duty individuals can obtain a somewhat subtle level of personal gratification from partaking in such acts that are not generally enjoyable to execute. I am not thoroughly convinced that if you are able to gain some happiness and reward from an action that is not generally alluring. The strengths of my personal view rely on the possibility of achieving a feeling of reward by completing an obligation. I feel there is an importance of doing something with a smile on your face. If you are unhappy to perform a moral action it will to reveal outwardly or make apparent that your heart is elsewhere, thus, tainting the action. However, if you perform these tasks seeking a somewhat level of enjoyment others will notice that you truly care about what it is you are doing and perceive the action to be a notable one. The weakness is obviously that you will be more probable to engage and look to engage in more actions that will give you this appeal and instant gratification. This is not an ideal situation because placing a slight neglect to a duty or obligation that you might not find appeal in defeats the purpose of completing all of the obligations set for us to go through with. Kant’s thesis has strength in the fact that the universal law seems closely related to the golden rule, which is do on to others as you would have others do on to you. With a statement as such it is awfully arduous to not perform a moral action. The weakness still lies in the fact Kant takes little to no consideration to humans’ natural emotions and feelings. Leading a moral life does not have to be a melancholy life, one in which you are bound to an endless amount of duties that you can seek no joy in. Whether or not Kant intended to make morality seem like torture, it appears it comes off in this manner. Kant’s overall view of morality appears near flawless. If there was a manner in which he could have incorporated a leeway for some emotions, I feel his thesis is in actuality how each individual should lead his or her life. .

Why I am against the death penalty

Why I am against the decease punishmentThe decease punishment has been used for old ages as a manner to penalize the guilty. Over the old ages the decease punishment has cost our Justice system 1000000s. Besides the cost, it violates our Human Rights Bill and punishes the guiltless people. The decease punishment is non effectual at cut downing offense. Our society is non any safer and does non discourage people from interrupting the jurisprudence. There are many different options in our system to contend offense, but the decease punishment in non one of them. The decease punishment is supposed prevent others from killing but it does non. Harmonizing to â€Å" Death Penalty Information Center the top academic criminological societies, 88 % of these experts rejected the impression that the decease punishment acts as a hindrance to slaying. † Fear of the decease punishment has small consequence on people perpetrating slaying. A slaying it normally starts, as an statement gone bad when the individual is angry. The mean individual does non walk outside and says, â€Å" I think I will kill today † . No 1 makes decease punishment their first thought when they leave the house. It ne'er crosses the people mind: if they kill a individual, they will acquire the decease punishment. Peoples are still killing and it has non slowed down the figure of slaying instances in the US. If the decease punishment is directing a message, unluckily no 1 is listening to the message. Second, the decease punishment cost more for an executing versus life in prison. Our state spends 1000000s to put to death captives versus go forthing them in prison. Our state is holding a budget crisis but it seem like we have 1000000s of dollars for the decease punishment. Harmonizing to â€Å" Death Penalty Information Center â€Å" California spends it cost $ 232.7 million per twelvemonth. A captive can pass life without parole cost $ 90,000 a twelvemonth per inmate. † We spend a immense sum for a system that has small consequence on offense. Third, the decease punishment goes against our Human Right Bill. On December 10, 1948, United Nations adopted the Human Rights Bill. Harmonizing to Article 5 provinces that â€Å" No 1 shall be subjected to torment or to cruel, inhuman or degrading intervention or penalty † . The decease punishment is hardhearted to worlds and a barbarous penalty. We say do non kill, but we are making the same thing. A signifier in which a human life is being taken by executing is unmerciful. Many captives reform while they are in prison. Criminals have committed some indefinable offenses, but they do non merit to hold their life to stop. The US has changed the significance of Human Rights Bill to warrant our system subsiding of tonss against another. In 1986, 48 states has get rid of the decease punishment. Fourth, the decease punishment has executed people who are non guilty. If we continue the Death punishment, non guilty people will decease. Harmonizing to decease Penalty Information Center â€Å" Since 1973, over 130 people have been released from decease row with grounds of their artlessness. From 2000-2007, there has been an norm of 5 exonerations per twelvemonth † . The job with the decease punishment is that guiltless people is killed. The system makes errors and do non ever have the grounds when convicting people. Many captives spend old ages functioning clip for a offense they did non make. There is no justness for them or their households. Justice system do non oppugn how many non guilty has died. We can penalize them stop other ways beside the decease punishment. They argue that the decease punishment put to deathing those that are guilty. Capital penalty takes many stairss to guarantee that fewer errors is made. In support of their side it is true that felons get a just test in the legal system. Our system assures that lives will be save by executing, merely the opposite there small grounds to turn out that the decease punishment saves lives. Retribution for a offense means the justness system is traveling to acquire even for the offense you committed. Retribution it is a barbarous manner for our justness system warranting what they are making. Taking the life of the people who has killed, we are making the same offense. Killing the felon is non traveling to convey back the victim. We justified it by stating it will convey closer to the victims ‘ households. The victim household heals no faster than they did while the captive was in gaol. They will sorrow the same manner in the same sum of clip. The system is adding slaying on top of slaying there is no terminal to offense. The rhythm goes on and does non stop and the whole intent is the stop slaying. At some point, the system has to confront world and happen another manner that works. Criminal ‘s carry out slaying it is the lowest signifier of offense and the system does the same thing but it gets a enthusiast name. Despite the claim that capital penalty can function as a manner to halt felons. Showing would be felons the effects of their actions. There is a jurisprudence and justness system and you have followed it. The decease punishment should do people believe before making a offense but it is merely the antonym. All things consider the justness system is morally incorrect when it comes to the decease punishment. The cost to put to death a individual is more expensive than life in prison without word. Knowing that guiltless people will be executed it is hardhearted manner of penalty. We should concentrate more on how stop and prevent offense.

Corrections Timeline

This essay is going to show the development with four eras of the correctional system. The four eras that will be discussed with be: 1800, 1960, 1980 and 2000. For each era we will go over the description of the holding or monitoring of the offenders, the treatment and punishment of the offenders and the influences of the particular era on today’s correctional system. The conclusion will discuss the most beneficial era to the correctional system, as well as, recommendations for ways in which the current correctional system could be improved upon. Penitentiary era 1800’s With the ideas of The Age of Enlightenment growing in popularity, a new concept of criminal punishment came into play; the penitentiary. The penitentiary first appeared in 1790 when the Philadelphia Walnut Street Jail was expanded to allow separate confinement of inmates. The western State Penitentiary was established in Pittsburgh, Pennsylvania in 1819, as well as the Auburn State Penitentiary in New York. The Auburn State Penitentiary was based on a congregate system. Seeks to redeem offenders through a well-ordered routine of the prison, implementing strict discipline, labor, obedience, and silence. The inmates were held in isolation at night but congregated in workshops during the day. They could not talk or look at each other while working or at meals. The work consisted of hard labor, such as the construction of roads or buildings. The inmates had to walk in unison, in a formation known as the lock step. The goal of The Auburn State Penitentiary was to redeem the offender through the well-organized practice of the prison (Clear, Cole, & Reisig, 2009). In 1821 after many years of lobbying from the Philadelphia Society for Alleviating the Miseries of Public Prisons, the Pennsylvania Legislature approves funding to build the Eastern State Penitentiary. The new prison will hold 250 inmates. In 1829 Masks are fabricated to keep the inmates from communicating during rare trips outside their cells. Cells are equipped with feed doors and individual exercise yards to prevent contact between inmates, and minimize contact between inmates and guards. In 1839, the County of Chester built its first off site jail at Market and New Street in West Chester, Pennsylvania. This structure subsequently underwent alteration and additions up until 1941. This Prison was modeled after the Walnut Street jails in Philadelphia the first County institution which was built in 1770. The only differences were the sanitary provisions, beds and heating for each cell. 1862 – A cabinet shop is opened in the prison. In the next ten years, the prison will add a shoe shop, a tailor shop, a wagon factory, and an expansion to the cabinet shop for other furniture and chairs. By 1878, the revenues will be sufficient to allow the prison to run without drawing appropriations from the state’s treasury. A knitting industry is added in 1893, a twine plant in 1912, a cannery in 1915, a license plate operation in 1917, a print shop in the early 1920s, and a laundry in 1940. The laundry, license plate, wood and metal furniture, printing and signage, silk-screening, and tailoring operations survive to this day at the prison. Community Era 1960’s to 1980. During this era there were lot of Development of behavioral techniques in 1930s and 1940s brought about concept of treatment in prisons. â€Å"Correctional Facilities. † Treatment based on â€Å"medical model. † Individual and group therapy programs evolved. Neurosurgery- Used to control aggressive behavior and destructive urges – frontal lobotomies were part of this approach. Sensory deprivation- Denial of stimulation by isolating prisoners in quiet, secluded environment. Aversion therapy- Drugs and/or electric shock used to teach prisoner to associate negative behavior with pain and displeasure. Today’s Prisons In today’s prisons Whites – 1229 incarcerated per 100,000 white males in their late 20’s. Blacks – 10,376 incarcerated per 100,000 black males in their late 20’s. the prisons today with the maximum system looks like the: high fences/walls of concrete barriers between living area and outer perimeter, electric perimeters, laser motion detectors, electronic and pneumatic locking systems, metal detectors, X-ray machines and television surveillance. Medium security prison, Similar in design to maximum security facilities, however, they allow prisoners more freedom. In them, prisoners can usually: associate with other prisoners, go to the prison yard, use exercise room/equipment, visit the library and take showers and use bathroom facilities with less supervision. Also in the medium security prison they usually have dormitory style housing. Cells and living quarters tend to have more windows. These facilities tend to have barbed wire fences instead of large stone walls. Last we have the minimum security prisons which: Housing tends to be dormitory style and prisoners usually have freedom of movement within the facility. Work is done under general supervision only. Guards are unarmed, and gun towers do not exist. Fences, if they exist, are low and sometimes unlocked. â€Å"Counts† are usually not taken. Prisoners are sometimes allowed to wear their own clothes. I believe that all the eras had a lot to do with how far we have come in the correctional system today. I would have to say that the way we are running the system today is the best we have had and we will continue to learn and over time will make the system better.

Issues In Diversity Essay Example | Topics and Well Written Essays - 250 words - 2

Issues In Diversity - Essay Example To bring change in the society on homosexuality, I will teach the individuals on society norms and their importance. The society’s norms and values are broken when homosexuality is practiced. Basing the issue of homosexuality on religion, it is against religion and is considered as a sin that should not be allowed at any given time. Teaching the society on the value of religion will also help in putting an end to homosexuality. Homosexuality is viewed as a behavior that is outside what religion expects of us and through practicing it one does something outside what is intended for them. The society needs to know that the issue of homosexuality has affected many Families and broken so many relationships (Baker, 2012). Teaching the society on the importance of right interpretation of civil rights will also help in putting an end to homosexuality. I think homosexuality is promoted due to misdirection or misinterpretation of civil rights. Homosexuality does not have a stand when based on moral issues. Individuals who are pro-homosexuals base their arguments on their personal preferences. However, they do not stop to think if their personal preferences are contradicting the personal preferences of other individuals. Homosexuality can only be put to an end if every individual stops to think of it in a moral perspective and thinking of other people’s

IgG deficiency Case Study Example | Topics and Well Written Essays - 500 words

IgG deficiency - Case Study Example IgG1 and IgG3 subclasses have antibodies that act on protein antigens and therefore inhibit roles of the antigens. Antibodies of IgG2 and IgG4, however, acts on antigens of â€Å"carbohydrates and polysaccharide† to impair functions of the antigens (Porth, 2011, p. 361). Defficiency of IgG2 leads to â€Å"sinusitis, otitis media, and pneumonia† that arise from bacteria that are embedded in polysaccharides. Examples of such bacteria are â€Å"S. pneumonia, H. influenza type b, and N. meningitidis† (p. 361). McMillan, Feigin, DeAngelis, & Jones (2006), however, argue that IgG4, unlike the other subclasses, do not have a binding effect that leads to cytotoxicity. No cause of IgG has been identified but genetics is suspected o play a significant role. Parents transfer genes to their children and the genes are responsible for protein development in the body of the offspring. Transferred defective gene is likely to imply defective development of elements of cells that relate to that gene and this suggest high susceptibility of IgG deficiency for people whose parents have the complication (Johns Hopkins University, n.d.). There is no treatment for IgG deficiency but management approaches exist. the approaches target specific infection that arise from the deficiency and not the deficiency. Some of the management approaches, according to The Centers for Disease Control and Prevention (2015), are vaccine against pneumonia and other live vaccines. â€Å"OPV2, BCG, yellow fever,† vaccines are however contraindicated. The recommended vaccines reduce susceptibility to the infections and therefore undermine pathophyliology of IgG deficiency (n.p. ). While these aim at preventing occurrence of associated complication, treatment of the complication is an alternative measure to managing IgG deficiency. Infections such as allergies may reoccur and require constant antibiotic medication. In extreme cases, however, direct

ASBO - For the Evan's Family Essay Example | Topics and Well Written Essays - 1000 words

ASBO - For the Evan's Family - Essay Example Case Analysis In order to analyze whether the threshold criteria are satisfied in the case of Barry and Felicity, having a clear view of the Section 31 of the Children Act 1989 is essential. The Section 31 particularly says about the care and supervision that must be provided to children if they are exposed to harmful living situations. According to Section 31(2), â€Å"A court may only make a care order or supervision order if it is satisfied – (a) that the child concerned is suffering, or is likely to suffer, significant harm; and (b) that the harm, or likelihood of harm, is attributable to – (i) the care given to the child, or likely to be given to him if the order were not made, not being what it would be reasonable to expect a parent to give to him; or (ii) the child is being beyond parental control† (Children Act 1989, as cited in legislation.gov.uk). Both the children have not reached the age of seventeen and hence they are under the jurisdiction of this l egal provision. Barry and Felicity are likely to suffer significant harm if a care order or supervision order is not made. The case makes it clear that Mrs. Evans, with whom the children are residing currently, is not much concerned about the wellbeing of her children. The way Mrs. Evens responds to Mr. Jones who complained to her about the noise disturbances made by Barry late at night clearly reflects that she does not care about her children. Mrs. Evans replies Mr. Jones why she should care what Barry does when his dad does not care at all. Although Mrs. Evans’ words indicate her anger toward her ex-husband, this attitude is not good for the future of Barry and Felicity. Similarly, it seems that Barry has been hanging out with a gang of older boys who have criminal background and they frequently visit Barry’s house late at night. They drink, smoke, and play music loudly. From the information available, it seems that Mrs. Evans cannot control her son or she does not try to do so. When Mrs. Evans mentions Mr. Jones’ complaint to Barry, he shouted at her and left the house and did not return for three days. He still plays music loudly at the mid-night and frequently disappears from home for days. Considering that Barry is only 15 years old, it can be argued that he is beyond parental control. He says that the lots of spare money he received from his father were for doing odd jobs for him. However, even Mrs. Evans is not sure whether he was telling the truth. Arguably, it can be suspected that Barry earns money through gang crimes or other illegal activities. If this suspicion is true, Barry is really exposed to criminality and this situation may cause him many troubles in future. In addition, substance abuse and alcohol consumption pose many potential challenges to Barry’s future. The fact that Barry’s attendance at school has been erratic over the last six months clearly indicates that Barry has been greatly affected by the separation of his father and mother (which happened six months back). Due to his unsatisfactory attendance rate, he is getting behind the coursework during a crucial time in his GCSEs. These evidences are enough to support the claim that Barry is likely to suffer a significant harm in the absence of a care order or supervision order. And, the harm is attributable to the care given to the child by his mother. Likewise, the case study indicates that Felicity has come to school in dirty clothes over the last six

Hammurabi Code Essay Example | Topics and Well Written Essays - 750 words

Hammurabi Code - Essay Example Societies in which women were subjugated will typically show numerous laws protecting the rights and advantages of men, but will prevent women from gaining any power of their own. In these types of societies, women are forced to depend upon the men in their lives to provide them with the basic necessities for life because they are unable to own anything, inherit anything or make any of their own decisions. Although it is easy to assume that women have always suffered a subjugated role in all societies from the beginning of civilization, surviving records from several ancient societies reveal that women are only just now surpassing the freedoms afforded them centuries ago. One of the earliest systems of laws recorded is the codified legal system of King Hammurabi (1795-1750 B.C.), the ruler of the earliest known major city. Marriage laws within this code are very specific regarding the rights of the woman being almost equal to the rights of the man. For example, the bride’s family had to agree to the marriage by accepting the bride-price from the groom’s family. That the girl was a valued member of society is indicated in that this bride-price, along with a dowry provided by her family, went with her into her new marriage and remained her property for life. â€Å"If a man wish to separate from a woman who has borne him children, or from his wife who has borne him children: then he shall give that wife her dowry, and a part of the usufruct of field, garden, and property, so that she can rear her children.† Underscoring the value of the bride to her family is the idea that the bride is always a member of her father’s house, r egardless of to whom or how long she has been married and her honor is strongly protected regardless of her position in the family. â€Å"If a man be guilty of incest with his daughter, he shall be driven from

Charity and charitable purposes Essay Example | Topics and Well Written Essays - 3250 words

Charity and charitable purposes - Essay Example In Incorporated Council of Law reporting for the State of Queensland v Federal Commissioner of Taxation , the judge had the following observation with what amounts to a charity: â€Å"The benefit should be charitable in the Elizabeth sense†. Understanding from the context of the judge, we arrive at the conclusion that any activity which amounts to the benefit of the public, or a section of the public amounts to a charitable purpose. A trust which carries out the duties of helping the needy and the poor sections of the society amounts to charity.This definition of charity encompasses all the above definitions mentioned: "The relief of aided, impotent and poor people, the maintenance of sick and maimed soldiers and mariners, schools of learning, free schools and scholars in universities, the repair of bridges, ports, havens, causeways, churches, sea-banks and highways, the education and preferment of orphans, the relief, stock or maintenance for houses of correction, the marriag e of poor maids, the support, aid and help of young tradesmen, handicraftsmen and persons decayed, the relief or redemption of prisoners or captives,   the aid or ease of any poor inhabitants concerning payment of fifteens, setting out of soldiers and other taxes†Understanding the Ambit of Charitable TrustA charitable trust is a trust which provides charity services to a particular section of the society, and such services should be for charitable purposes only. Relief from poverty:The main question that was sought to ask was how poverty.... This definition of charity encompasses all the above definitions mentioned: "The relief of aided, impotent and poor people, the maintenance of sick and maimed soldiers and mariners, schools of learning, free schools and scholars in universities, the repair of bridges, ports, havens, causeways, churches, sea-banks and highways, the education and preferment of orphans, the relief, stock or maintenance for houses of correction, the marriage of poor maids, the support, aid and help of young tradesmen, handicraftsmen and persons decayed, the relief or redemption of prisoners or captives, the aid or ease of any poor inhabitants concerning payment of fifteens, setting out of soldiers and other taxes†4 Understanding the Ambit of Charitable Trust A charitable trust is a trust which provides charity services to a particular section of the society, and such services should be for charitable purposes only.5 Relief from poverty: The main question that was sought to ask was how poverty could be defined, and within the definition, which kind of people needed to be brought in to given relief to. Poverty is a very relative concept and thus includes people who are not able to provide a lifestyle for themselves that include the basic necessities like shelter, food and clothing. As found in a number of cases, only showing kindness or generosity to someone is not enough to come under a charitable trust or purpose because a factor of poverty must be defined so that it also serves the purpose of having benefit to the public in a way that it is useful to a certain community and helps to fight the problems that those people face with regard to poverty. In the case of Oppenhiem, we understand that

RECONSTRUCTION AND RADICAL Assignment Example | Topics and Well Written Essays - 500 words

RECONSTRUCTION AND RADICAL - Assignment Example Reconstruction, it remains true that Radical Reconstruction was more challenging for the Southern States to fulfill than Presidential and provided more benefit to the freedom. The main reason that rendered Radical Reconstruction more challenging in the Southern States was the ability of the same to undermine the South’s economic and social gains. Specifically, Radical Construction fundamentally demanded the democratization and redrawing of racial relations and the enshrining of these milestones in the constitution. This would mean that the rules that had been enshrined in the Emancipation Proclamation would be upheld and not reversed. Although President Abraham Lincoln had successfully issued the Emancipation Proclamation on January 1, 1863, yet there was hope among the Southerners that the legal stipulations thereof could be reversed. As a matter of fact, to underscore the reality of this hope, Southerners had attempted to reverse the Emancipation Proclamation by universally condemning it in the Confederacy and then following this condemnation with legal means (Festle, 2003). Again, Festle (2003) divulges that Radical Reconstruction was viewed as a serious threat to the welfare of the South since it could allow blacks the chance to access educational, economic and educational opportunities as a way of transforming their welfare and the society in which they lived. This according to the Southerners meant that blacks were no longer going to kowtow to white American’s demands and servitude. As if their fears were founded, as the Radical Reconstruction neared its conclusion, African Americans vied for greater freedom and empowerment, while unrelentingly challenging and addressing centuries of anti-black laws and traditions. The foregoing does not downplay the hardship that the South experienced in Presidential Reconstruction. However, compared to Radical Reconstruction, Presidential Reconstruction was a lesser evil. In fact, the President could still be

A close focus on act III of The Crucible Essay Example for Free

A close focus on act III of The Crucible Essay The play, The crucible, shows how people react to mass hysteria caused by a group of people, as people did during the McCarthy hearings in the 1950s. The House un-American activities committee searched for communist sympathisers because they were felt to be a threat to the state. Many Americans were wrongly accused of being communist sympathisers and were convicted and sentenced without any real evidence of them having committed a crime. Mere suspicion was classed as evidence. And like the during the witch hunts, anyone who spoke out was accused which made defending yourself a death wish. This is how McCarthyism was linked with the witch-hunts that had taken place in Salem, Massachusetts in 1692. The title of the play describes exactly what was happening at the time of the witch-hunts. A crucible is a container in which metals are heated to extracted the pure element from impurities, and crucible is another word for a cauldron that witches use to brew their magic potions in. So the word crucible could metaphorically be used to explain how the activities in Salem were like a potion brewing in a cauldron with the potion being mixed to separate the witches (impurities) from the good, god-loving citizens (element). The opening scene of the play shows the girls dancing in the woods around a cauldron, they are spotted by Parris who also sees that one of them is naked.  The people of Salem were Puritans and so dancing was perceived as a sin.  The morning after the dancing, two of the youngest girls cannot wake from bed. A doctor is called to help the girls but he cannot diagnose what is wrong with them or how they can be helped, His only advice is to look to the unnatural. The girls do not confess to their activities until Parris confronts them. Abigail says all that they did was dance and strongly denies that any of them were naked, Uncle, we did dance. There is nothin more. I swear it, uncle. Mrs Putnam, the mother of the other ill child, believes that her daughter Ruth and Parriss daughter Bettys illnesses are caused by the devil. Parris calls for Hale who is an expert on demonic arts  Parris is the minister of the Village, much to the Putnams dismay. Mr Putnams brother was in competition with Parris for the position of minister and so the Putnams have a grudge against not only Parris, but the Nurse family who prevented him from being minister and many of there neighbours for various reasons. Especially with Giles Corey who has worked out that the Putnams will do anything to get their hands on other peoples land, This man is killing his neighbours for their land! John Proctor also has a grudge against Parris. Hale arrives in Salem, He is a confident and well education young man who believes he has all the answers. As he is examining Betty Giles Corey distracts him by asking him questions about his wife. Giles says that his wife reads strange books whilst they are in bed and while she is reading, he cannot pray. Hale carries on trying to help Betty with little effect. Parris tells Hale that he thinks he saw a kettle in the grass with the girls in the wood with something moving inside it. Hale questions Abigail but she denies that she drank blood and called the devil. Abigail then realises that if the truth is found out she will get in a lot of trouble and so she passes the blame onto Tituba, Parriss black slave, by saying that Tituba forced her to drink blood and even blames her wicked dreams on the slave. Tituba confesses to save herself from being hung. She mentions four peoples names that she supposedly saw with the devil. Abigail mentions more and more names and then the rest of the girls join in, mentioning the names of anyone they hate, have a grudge against or just dislike. As the girls cried out more names, the hysteria began to grow.  By accusing others of witchcraft they are diverting attention away from their original misdemeanours. We can see that the Proctors relationship is not very strong, they make petty small talk over dinner and dont appear to be happy together. One reason for this may be that Elizabeth has not forgiven John for having an affair with Abigail whilst she was ill.  Whilst Mary was at court with the other girls where people were being tried for witchcraft she made a poppet for Elizabeth. Abigail was sitting next to Mary whilst she made it. By now 39 women had been arrested and Goody Osborn was sentenced to hanging.  Mary, who had always been a very shy, timid girl was now becoming very easily led along by Abigail and just as confused between fact and fantasy as the other girls and. This is apparent when she tells the Proctors that Sarah Good had confessed to having made contact with Lucifer, and that Sarah Goods spirit tried to choke her in the courtroom. Mary then speaks of even more fantasy when she says that terrible stomach pains had been inflicted upon her when she had turned the old woman away whilst she was begging. Mary also accused the old woman of mumbling a spell to her, but Sarah Good claimed it was not a spell, it were her commandments. The court asked her to repeat the commandments, but she could not.

Strategies of Pressure Groups

Strategies of Pressure Groups Pressure Groups Robert Hassam Britain is often referred to as a homogenous society as the public tend to share similar political views. However, more recently, there has been a decline in membership in political parties and an increase in the membership of pressure groups. In this essay I aim to define pressure groups, analyse their role and importance to British democracy. According to Duncan Watts, apressure groupscan be described as an organised group which seeks to influence government policy, protect or advance a particular cause or interest. They can also be described as ‘interest groups’, ‘lobby groups’ or ‘protest groups’. However some people avoid using the term ‘pressure group’ as it may inadvertently be interpreted as meaning the groups use actual pressure to achieve their aims, which does not necessarily happen. Pressure groups are distinct from political parties in that they do not seek political power, instead they aim to influence those already in power. The term pressure group is relatively recent, however voluntary organisations have been attempting to influence policy ever since the late 18th Century. A typical example of this, is The Society for Effecting the Abolition of the Slave Trade. Which was founded in 1787 under William Wilberforce, and successfully achieved its objective to abolish slavery in 1807. A pressure group may be a huge organisation such as the British Medical Association (BMA), which stand represents doctors both individually and collectively on a wide variety of employment issues, or it may be a single-issue locally based organisation like CLARA (Central Area Leamington Residents Association), which represents less than 300 households campaigning to preserve and improve the town of Leamington Spa. Pressure groups are not only distinguished by size, cause, and aim but also by the levels of extremism, such as the Animal Liberation Front, which has frequently indulged in illegal activities to further its aims and objectives. Pressure groups may also have strong links to political parties such as the Institute for Public Policy Research (IPPR), which have links to the Labour government and have regular contact with cabinet ministers. (Jones Norton, 2010) Pressure groups are divided into the following sub-groups: Causal (or promotional) groups, Sectional (or Protection) groups and also how close they are to the government known as either Insider or Outsider groups. Causal groups are involved with a particular issue or issues and serve this cause by promoting it. These groups vary in size and aims, which can be permanent ‘such as friends of the earth’ who continually campaign for their particular cause or they can be temporary such as CND, the ‘campaign for nuclear disarmament’ who would disperse if their cause was attained or irreversibly lost. Sectional groups represent and further the interests of a particular part of society and as a result the members of these groups are more directly concerned with the outcome of the campaign at hand as they usually stand to gain something (professionally, economically). Therefore membership is usually limited to the sole members of that particular group of the populatio n and aim to involve all those that are eligible to join. Insider groups have strong links with decision makers and are regularly consulted. They are the groups that the government local and national considers to be legitimate and are, therefore, given access to decision makers. This category includes the National Farmers Union (NFU) and the police force, as they are involved in the consultation process as a matter of course when government proposals relevant to their activities are discussed. An outsider group is one that operates outside the government, they have no special links with them but they still seek to influence decision makers by (usually) mobilizing public opinion, an example would be Fathers 4 justice. Theyre generally not involved in the Law Making process and so dont have a chance to influence legislation. This may be due to previous protests or demonstrations which have made their relationship with the government hostile. Generally, Insider groups would be more s uccessful that outsider groups because of the influences that they do hold and the power they have to change the decisions made by the government. (Jones Norton, 2010) (http://www.bbc.co.uk/bitesize/higher/modern/uk_gov_politics/central_gov/revision/4/) Pressure groups act as intermediaries between the government and the public. This role has become increasingly important as the scope and complexity of politics have increased and as it has become more difficult for political parties alone to perform all the representative functions. This means that they act as a spokesman or negotiators on behalf of clearly defined sectional interests, for example the ‘National Farmers Union’ which acts on behalf of farmers or the ‘British Medical Association’ which acts on behalf of medical professionals or doctors. Additionally pressure groups help governments to create and actualize their approaches by entering into detailed consultations on recommendations for administrative action or legislation and in this way by conveying a measure of public consent to the output of policy and decision making processes. For example, accommodation has had an extensive impact on housing legislation over the years, the Child Poverty Act ion Group has consistently pressed for changes to help the poor and particularly families with children. Pressure groups empower new concerns and issues to achieve the political agenda, thereby facilitating social advance and avoiding social stagnation, for instance the women’s and environmentalist movements. Pressure groups build social cohesion and political stability by providing almost a safety net for people and collective demands. (Forman and Baldwin, 2007) For many years, pressure groups in Europe worked at or below the level of the state. On the other hand, they have been dynamic in the EU since its formation, playing a significant role in its political improvement and policy making. The movement of political power towards the EU has implied that more power is progressively being transferred to Brussels. Hence pressure groups are increasingly turning to Brussels to campaign on issues as issues have a tendency to work on a worldwide level such as global warming. Pressure groups can now impact choices made on a worldwide level. The rapid rise of multinational originations also implies these companies have influence on a global level. Hence people need to campaign through pressure groups to impact them on key issues like child labour and free trade. (Watts, 2008) Quite a bit of what the public thinks about politics originates from the activities of pressure groups. They empower political instruction and raise political awareness. They commit significate resources to carrying out research, maintaining websites, remarking on government approaches and using high profile and expert individuals to get over their perspectives. An example would be Bob Geldof and the Live Eight concerts held in 2005 in ten cities, which was designed to put pressure on the G8 leaders to tackle global poverty. Pressure groups likewise provide a means for cooperation in local politics between elections. For instance, in 1994 the A452 Coordination Group campaigned to block plans by Warwickshire County Council to make the A452 a dual carriageway. After the groups exceptional campaigning, the board dropped the arrangements. . (Forman and Baldwin, 2007) (http://www.historylearningsite.co.uk/what_are_pressure_groups.htm) The strategies and methods utilized by pressure groups can influence its success such as advertising. Pressure groups endeavor to impact public opinion through the media and mass communication including strategies of advertising and public relations. Groups that use advertising campaigns such as NSPCC and GOSH (Television advertisement campaigns) appeal to a wide audience which often make the group a household name. Another technique utilized by pressure groups is ‘lobbying’. Lobbying is the art of cultivating and influencing the opinions of policy-makers, such as MPs and Lords. Methods of lobbying vary and can range from sending letters, making presentations, providing briefing material to Members and organised rallies. Another method used by pressure groups is participating in publicity stunts. In 2008, Greenpeace battled against the 3rd runway at Heathrow Airport by breaking into the air terminal and protesting on top of one of the planes, this generated a lot of medi a coverage and attention from both the general population and the government. The use of public demonstrations can also aid the success of a pressure group, which can be seen from the 2010 NUS (National Union of Students) demonstration against the rise in university fees in London, this was exceptionally advertised and the group drew a considerable amount of attention, nonetheless it didnt impact the government and the rise in fees still occurred. Pressure groups also raise petitions which can lead to success, for example the National Trusts petition against the government selling forestry lands which was a success as Cameron dropped the proposals not long after the petition was presented. Pressure groups that use strategies and methods widely are more inclined to be effective rather than groups that sit back and are not involved in any public demonstrations or petitions such a Tentelini, a group that isnt known to use any methods to gain attention or to influence the government. (http://news.bbc.co.uk/1/hi/uk_politics/7338875.stm) (http://www.bbc.co.uk/news/education-20412792) A pressure groups can use a variety of different methods to influence law. Firstly, it can merely educate legislators of its member’s inclinations. Second it may well give money or time to help with an election campaign. Third, its members may threaten, as a group, to vote as a block. By doing this they guarantee to help a cooperative legislator, and threaten to harm a non-cooperative legislator. Fourth, a pressure group may speed up legislation by writing bills and helping legislators make progressive agreements. Finally, a pressure group my attempt to influence members of the executive, who have some law making input and who can partly decide the strength and effectiveness of law enforcement. (Coxall and Robins, 1998) For some, pressure groups are a fundamental part of democracy. To others, pressure groups undermine the whole principle of democracy. Democracy is a system of government where decisions are arrived at by majoritarian principles with representatives elected at periodic elections where political equality and political opportunity permit the voter a compelling decision between competing candidates in a secret ballot. Arguments are present on both sides of the debate on whether pressure groups are beneficial for the government, and democracy. These arguments are typically focused upon Elitist and Pluralist belief systems, which differentiate one another in terms of thoughts. Elitists believe that the utilization of pressure groups threaten democracy, with the opinion of parties becoming too extreme in their views of which they become involved in criminalised activities, exert forced influence onto the general public, and the concept of innocent lives being harmed in the process of the pr essure groups protests. Pluralists however, consider pressure groups to promote democracy; with the use of individuals participating more in politics, and the focus of particular issues raised by the group to the government. Pluralists believe that pressure groups overcome the democratic deficit that builds up thereby enhancing the quality of democracy by increasing participation and access to the political system. Pressure groups complement and supplement electoral democracy in two main ways: by providing a vital form of citizen influence of the government between elections and enabling society’s variety of opinions is known. Pressure groups are the objective way to influence decisions in a free society. Freely operating pressure groups are crucial to the effective functioning of liberal democracy in three main ways: they serve as a voice between government and society, they disperse political power and provide an important counterweight and balance to political power which is particularly important with the two main political parties: the Conservative Party and the Labour party. Pressure groups improve the responsibilities of decision makers to electorates if enough impact is made. (Joyce, 2010) Although its undeniable that pressure groups play a vital role in British politics particularly in today’s less differential society, perhaps its not the suggested one of the pluralist model. For example, pressure groups do enhance interest however in an unequal way, benefiting the powerful and organised and disadvantaging the weak and disorderly. The groups themselves may not be representative of their members as many members views are overlooked if they dont comply with the ideologies of the leaders or decision makers of that group. The methods of influence some groups use build social discontent and political instability by intensifying social frustration and injustice felt by certain sections of the population. This can disregard the benefit of the whole of the community and this kind of civil disobedience cant be justified in todays democratic system. In conclusion, pressure groups can both detract from and strengthen democracy to a certain extent. Pressure groups are an essential dimension of any democracy, yet they can endanger it if sectional groups undermine the public interest or if the methods they use are corrupt or intimidating. Lastly in my humble opinion, I think pressure groups are a fundamental part of any democratic society, serving as a voice between the elite and the common citizens. However I question, if pressure groups where not influential in British politics, would the voices of common citizens be heard or even considered by the elite minority such as politicians? Bibliography Bitesize, B.,n.d. Pressure Groups. (Online) Available at:Â  (http://www.historylearningsite.co.uk/what_are_pressure_groups.htm)Â  (Accessed on 07th of April 2015) Bitesize, B,.n.d. Government Politics. (Online) Available at:Â  (http://www.bbc.co.uk/bitesize/higher/modern/uk_gov_politics/central_gov/revision/4/)Â  (Accessed on 07th of April 2015) Bitesize, B,.n.d. UK Politics. (Online) Available at:Â  (http://news.bbc.co.uk/1/hi/uk_politics/7338875.stm)Â  (Accessed on Bitesize, B,.n.d. Education. (Online) Available at:Â  (http://www.bbc.co.uk/news/education-20412792)Â  (Accessed on Jones, B., M., Nortan, P. (2010) Politics UK, 7th Edition. London: Pearson Education Ltd. Watts, D. (2008) The European Union. Edinburgh: Edinburgh University Press Ltd. Forman, F.N., Baldwin, D.J. (2007) Mastering British Politics, 5th Edition. Basingstoke: MacMillan Press Ltd. Coxall, B., Lyton, R. (1998) Contemporary British Politics, 3rd Edition. Basingstoke: Palgrave Joyce, P. (2010) Understanding Politics, 3rd Edition. London: Hodder Education.

The bluetooth technology

The bluetooth technology Abstract: Bluetooth Technology has been widely spreading every single day due to its availability in most of the electronic devices that are dominant nowadays. As any other technology, when widespread, will have a huge impact on the users and societies. In our study, we will search the impact of Bluetooth technology on the society. To get a realistic knowledge, a survey contains 10 questions on our topic was conducted. 100 people from Multimedia University and Limkokwing University were randomly chosen to participate in our survey. In addition, we relied on other sources such as the internet to collect information regarding our topic. From our study we have found that, the spreading of the Bluetooth technology has made life easier. As any other technology Bluetooth is, sometimes, used in a negative way and consequently has a negative influence. Acknowledgement: We would, firstly, like to thank our God who gave us the ability to accomplish this research. Secondly, many thanks to our EHM 3066, Engineers and society, subject lecturers who have been giving us a very good example of diligence and hard work. We send our gratitude to the participants who have participated in our questionnaire and given us from their precious time. Thanks to our families, friends and all our beloved people who has always given us the inspiration to be successful. We would finally thank our institution, the Faculty of Engineering (FOE), Multimedia University. 1.0 Introduction: Technology is considered to be the mount to climb up and attain the desired degree of development of a society. Man has been trying to facilitate his life through inventions and innovation. He first invented the â€Å"wheel† and hasnt stopped so far. He lately invaded other planets. Telecommunication means, when computerized, played a very important role in spreading data which enabled scientists utilize the outcome of other scientistsresearches and that lead to more and more advancement in various fields of science and thus more technical devices. These devices didnt have the present shape. A lot of effort was exerted in the process of betterment with regard to performance, size and ease of use. This trial is to have a clear idea of how Bluetooth technology is affecting the society and our lives. 1.1 Overview of Bluetooth: In the striving for reduction of cables between computers and their connected units, Ericson Mobile Communication, in 1994, started the project named and named it Bluetooth. What is Bluetooth? Bluetooth is the name of a new technology that is now becoming widespread on a commercial basis. It promises to change significantly the way we use machines. Instead of using cables to transmit data between components of a PC,for example, the printer, the mouse and so on, a small and cheap radio chip to be plugged into these components will do the job. In short it is a Cable-replacement technology. The name was first used as a code name, but it stuck as time passed. It is named after the 10th Danish King, Herald Bluetooth, who had united Scandinavian Europe at a time it was severely divided. The founders of the Bluetooth technology found the name fitting as the Bluetooth technology is able to unite various industries like cellphone, computing and automotive markets. By Bluetooth technology one is able to simplify and combine several forms of wireless communication into a single, safe, power-saver, inexpensive, globally available radio frequency. 2.0 Bluetooth Mechanism: By embedding short-range transceivers that are inexpensive and tiny, into new electronic devices that are available nowadays, Bluetooth achieves its goal. In addition to three voice channels, Bluetooth can transfer data at data transferring speed up to 721 Kbps. As Bluetooth operates on radio band, at frequency of 2.45 GHz, that is unlicensed and globally available, people or â€Å"international travelers† have no obstructions to use Bluetooth-enabled equipment. Moreover, Bluetooth units might be either externally adapted or built into electronics devices. E.g. in a personal computer, Bluetooth devices can be built into the motherboard as a PC card or on the other hand it can be used as an external Bluetooth adaptor through connecting it to a USB port. From the IEEE 802 standard, each Bluetooth device has its own 48-bit address. One feature is that connections are not only point to point, but they can also be multipoint connections. Usually, Bluetooth devices have a maximum ra nge of connection up to 10 meters. However, by increasing the power, the range of connection might be extended to 100 meters. Bluetooth devices have a technique called frequency hopping. The main purpose of this technique is to protect the devices from radio interference. The mechanism of the technique is that Bluetooth devices change arbitrarily their frequency maximally 1600 times/s. when an error occurs, it will be immediately corrected by the three complimentary error correction schemes that any Bluetooth device has. Bluetooth devices are also provided with built in verification and encryption. When Bluetooth devices are in a â€Å"hold† mode they consume approximately 30 micro Amperes from the battery of the electronic devices, such as cell phones and laptops, while they consume a range of 8 to 30 milliamps, less than one tenth of a watt, when they are in the active transmission mode. Moreover, only 0.3 mA are consumed by the radio chip, when in a standby mode, which means that its less than 3 % of the power that is used by a mobile phone. Also, the radio chip has an excellent power-saving feature that is as soon as the traffic volume lessens, the chip shifts automatically to a low-power mode. The above indicates that Bluetooth devices do not drain precious battery life. But beyond un-tethering devices by replacing the cables, Bluetooth devices can form a small and private ad hoc grouping of devices that are away from fixed network infrastructures by providing universal bridges. These bridges are to connect between a device, data networks and a peripheral interface. Furthermore, noisy radio frequency environment does not affect Bluetooth devices since they are designed to use a scheme called frequency hopping scheme and as well as a fast acknowledgment in order to make the link active and strong. After sending or receiving a packet, Bluetooth radio modules keep away from interference from other radio signals by jumping â€Å"hopping† to a new frequency. The Bluetooth radio uses shorter packets and jumps â€Å"hops† faster than other systems that are operating in the identical frequency band the thing that makes the Bluetooth radio more active and stronger than other systems. In addition, these fast hopping from a frequency to another an d the short packages decrease the impact of domestic microwave ovens. Random noise may affect long-distance links. However, Forward Error Correction (FEC) is used to eliminate this impact. The encoding is, then ideal for an uncoordinated environment. At the bit level, Bluetooth security is guaranteed. Users can control the authentication by using a 128 bit key where radio signals are coded with 8 to 128 bits. The Bluetooth radio transmissions match the safety standards that are required by the countries where the technology is used with respect to the effects of radio transmissions on the human body. Bluetooth enabled devices emissions are less than those from industry-standard cordless phones. Also, Bluetooth module do not interfere, cause harm or even affect public or private telecommunications network. 2.1 Bluetooth Operation Modes: A feature of Bluetooth technology is that, once the Bluetooth devices come in range of each other, they will instantly form networks between each other.Another feature is that a number of devices can be connected together via Bluetooth in an ad hoc form. This feature is technically known as â€Å"Piconet†. In a piconet two or more devices can be connected together. A scatter net can be formed by multiple independent and non-synchronized piconets. Moreover, any device that is in a piconet can be a member of another piconet through a technique called time multiplexing. This techniques mechanism is to share the time suitably, thus a device can be a member of two or more piconets. As Bluetooth system supports multi-point connections as well as point to point connections, Bluetooth devices can be connected to a maximum of another 7 points, a point to multipoint connection. Every piconet has different frequency hopping sequence and hence a number of piconets may be created and linked together. All users that are sharing onepiconet are synchronized piconets hopping sequence. A Bluetooth device uses different hopping sequence when the device is connected to two or more piconets where a piconet starts with 2 connected devices, e.g a laptop and a mobile phone, and may grow to 8 connected devices . All Bluetooth devices have the same implementations. However, there are two types of unites in a piconet which are master units and slave units.A master unit is the unit which synchronizes the other devices by its clock and hopping sequence, where the other devices in the piconet are called slave units. In order to differentiate between units participating in the piconet, a 3-bit MAC address is used. When a unit does not have a MAC address, it is called a park unit. Park units are usually synchronized. Anyway, since parked units have an 8 bit address, a maximum of 256 parked units may be existed. 3.0 Bluetooths positive impact: 3.1 Huge Impact: What could the practical use of Bluetooth be on Society? Well, it is unlimited and depends on the way it is used. From a practical viewpoint, we can adapt all computerized Have a look at the list below! Printers Desktop and laptop computers Modems LAN access units http://www.sysopt.com/img/icons/war_ex.jpghttp://www.sysopt.com/img/icons/log_v450.jpgFax devices Phones and pagers Headsets Keyboards joysticks Notebook computers Practically, most of the digital devices can be a part of the system of Bluetooth. The dynamic of Bluetooths connectivity nature has the ability to replace USB (Universal Serial Bus). A Bluetooth-mouse can be in existence by using the improved plug-and-play-systems. The installation can take effect after the operating system is rebooted. 3.2 Bluetooths Applications 3.2.1Bluetooth and the Internet One of the most important advantages of Bluetooth is that it enables you to connect a device provided with internet connectivity to another device that is not. E.g. you might connect your hand phone that has a built-in Bluetooth to your laptop that has a Wi-Fi via Bluetooth connection. Then, via you laptops Wi-Fi, if exists, to a Wi-Fi router. Once your laptop is connected to the internet you can enable your hand phone to be connected to the internet as well. Moreover, this example goes correctly to most of the devices that have Bluetooth technology not only hand phones.   Ã‚  Ã‚  Ã‚  Ã‚  Buying a device that has a Wi-Fi or buying another that has a Bluetooth technology is sometimes a confusing choice. One may think that by choosing Bluetooth he/she will not be able to connect to the internet and in this case choosing a Wi-Fi would be better.   Ã‚  Ã‚  Ã‚  Ã‚  However, this is not such a really correct choice. Since, from the above example, you can modify your device to get connected to the internet via the Bluetooth technology purchasing a device that has a Bluetooth technology is a better choice as you can get two technologies in one ; internet connectivity (the function of Wi-Fi is achieved) and Bluetooth technology. 3.2.2 Some Other Applications: A Bluetooth-mouse could be used at a further distance from a monitor, and while moving about in the room. A Bluetooth-keyboard could be used further away from the monitor. This would reduce eye-strain for persons who are long-sighted. Increasing the distance would also reduce exposure to electromagnetic radiation from the monitor. A Bluetooth-keyboard could also be used to address more than one computer, in a dynamic, switchless manner. You can use your e-mail while your laptop lies in a briefcase; when your laptop receives an E-mail your mobile phone will immediately alert you and then, you can read the received e-mails in your mobile phones display. A businessman may enable his laptop to find a suitable printer once he enters a company.As soon as a suitable printer is found, data will be sent from the laptop to that printer via Bluetooth connection to print it out. Make a connection to printers and faxes without messy cables. Wireless connection to video projectors and digital cameras. An easy and elegance connection from cell phone to handsfree headset. A useful connection between Bluetooth interface to office private branch exchange (PBX). Smooth creating of dial up networks and automatic e-mail. Use mobile phones as office wireless phones. Use of personal computers or PDAs (Personal Digital Assistants) as hands-free phone. Automatic transferring and swapping of files, software, electronic business cards, calendars etc. Dancing couples at a dance hall could receive the music through their headsets and pick the dance of their choice Not to mention many more to come. 3.3The influence of the Bluetooth technology on Society: Thanks to the Bluetooth technology, a wireless LAN (Local Area Network) can be implemented without wires. This means that all the functions of a conventional fixed LAN are available in a WLAN including file sharing, peripheral sharing, Internet access and many more. 3.3.1 Mobility and low cost: Mobility and cost-saving installation are the main advantages of wireless networks in society. Most of the application scenarios of wireless are related to these two features. Mobility enables users to roam on while being connected to backbone networks. Many jobs require wandering workers. Portable computers are indispensable for people like inventory clerks, healthcare workers, police officers, and emergency-care specialists. Wireless networking provides important cost savings in the areas where cables cannot be easily installed, such as historical buildings and residential houses. In distant sites, branch offices and other situations where on-site networking expertise might not be available or fast networking is needed, computers equipped with wireless LANs can be pre-configured and shipped ready to use. 3.3.2 Circulation of Information: The wireless local area network business has been focused on offices since the industry began. But recently, home networking is seen to be a fast growing market. The personal computer has become a powerful platform for education, entertainment, information access and personal finance applications. At home, with the wide use of PCs and the Internet becoming the main way to access information, the role of the PCs has expanded and will continue to expand especially in the area of education. On the social side, this means that wireless networks is the easy way to access internet, find information and at the same time the users gain more knowledge through browsing the internet. 3.3.3Avoiding wire tangle Bluetooth is also one of the examples of using wireless range other than PDA and etc. The objective of Bluetooth technology is to replace cables and infrared links used to connect unrelated electronic devices with one universal short-range radio link. 3.4 Industrial boom Bluetooth applications reflect the mobile phone industry background of the inventors of some famous phone models for example Nokia, Sony Ericsson, Motorola and many more. There are many useful things that Bluetooth had given to our society. 3.5 Information Interchange In meetings and conferences, users can share information instantly with all participants without any wired connections. 3.6 Convenience: A user can also cordlessly run and control, for instance, a projector, or can connect his headset to his laptop or any wired connection to keep hands free for more important tasks while in the office, home or in the car. When laptop receives an email, the user will get an alert on mobile phone. Users can also browse all incoming emails and read those selected on the mobile phones display. Public Bluetooth wireless access points could enable free or charged access to information and services through laptop computers and PDAs. For example, imagine being able to browse the catalog of a public library on your handheld PC as soon as you enter the building. Or, imagine how helpful it would be to have instant PDA access to a building map and to customized real-time flight arrival and departure data as you make your way through a busy airport. Consider the convenience of having automatic, wireless access to a shared hotel printer as you make last-minute changes to a presentation in your hote l room. 3.7 Productive and Time saver: In a Bluetooth-enabled business world, the cellular phone could provide a link to everything beyond the 10-meter range limitation. Without even removing their Bluetooth-enabled cell phone from their briefcase or luggage, mobile professionals would be able to check voice mail, send a fax, receive email, verify inventory levels, and surf the Internet through their laptop computers. This would extend the concept of anytime, anywhere data access well beyond the current standard of cell phones and beepers. 3.8More Freedom: In considering the above scenarios, some may argue that the access of Wireless LAN would increase our freedoms and improve our professional lives because it allowing us to decide when and where we do our work. Wireless certainly has the potential to improve society, and our personal and professional lives in various ways. It gave us many advantages. 4.0 Negative Impact: The convenience of Bluetooth technology cannot be denied, but neither can the way they have negatively impacted daily living. Some of the effects can be dispensed with if boundaries are set. Here we will discuss some negative impact of Bluetooth. 4.1 Violation of Privacy: Mobile phones and PCs usually contain private stuff such as family pictures, bank account numbers, passwords and so on. Unfortunately, these devices are able to be hacked by Bluetooth. The hacker sends a user a file (lets say an image), when received, it will be opened as a usual image where actually it has a built in hacking software. Once the user opens the image, the hacker will be able to control the users device. 4.2 Sabotage: In the same way as downloading from the internet, transferring data via Bluetooth may harm your device if the data contain viruses. The strength of the viruses varies from one to another; some viruses are easy to be removed while some viruses totally damage the device once they reach the device. 4.3 Health Damage: While the topic remains controversial, there are people who believe the microwave radiation the phones emit can cause such problems as cancer and Alzheimers disease from prolonged use. 4.4 Use in inappropriate places: Using Bluetooth to transfer data in inappropriate places is considered to be harmful and such behavior expresses a negative attitude. E.g. Students in a classroom may get busy transferring data via Bluetooth using their hand phones while their lecturer is giving a lecture. 4.5 Sleazy Contents: A child or a teen-ager may innocently receive a file that contains sexual or immoral contents which are not suitable for their age. 5.0 Conclusion and Recommendation: This project was done to assess the impact of Bluetooth technology on the society in the near future. We have investigated in how and why Bluetooth technology has widely spread and what impact that Bluetooth technology has been giving. In addition, we have explained in details the reasons of this impact. Mainly, the bases we had for this report are from a survey that we have done on 100 students and lecturers from the whole population of Multimedia University and Limkokwing University, Cyberjaya campuses. We used the collected data from this survey to explore the impact of Bluetooth technology on the society as we used MMU and Limkokwing Universities as small societies. We have heavily used the internet to collect information about Bluetooth technology and also to find out its impact on other societies. Why our survey was on only 100 people is that, making a survey on a bigger number of people would be expensive and time consuming. This report might be useful to social specialists to find out why some technologies have more interest on people, Bluetooth developers as they can decrease the negative impact of this technology, and to other people who are interested in the relationship between the technology and the society. Future researchers who are going to do a research on the same topic should keep this in mind, this research has been done based on a questionnaire that was made on people who have almost the same range of age as most of them are university students. Future researchers who have a wider research ranges can make their research on different age ranges. The results of the survey showed that 90 % of the people, who have answered the survey, have Bluetooth-enabled devices. The reason of this huge number of Bluetooth users is that, most of the new electronic devices that are available nowadays have Bluetooth technology. Moreover, about 25 % of the participants, who have Bluetooth-enabled devices, have faced negative impact of Bluetooth technology such as getting hacked or received viruses during data transfer. The reason is that most of them didnt know that Bluetooth may carry viruses or hacking software when data is transferred. Even though Bluetooth technology is widely spread so far, we think it will make life easier and more effective if it is spread on a wider range. For example, providing Bluetooth connection in universities laboratories would make data transferring between researchers, students or lecturers easier. However, care must be taken when using data transfers via Bluetooth since data may have viruses or hacking software. A good solution is to use anti-virus and anti-hacker software. Moreover, children and teenagers have to be watched when using Bluetooth-enabled devices. References: Book: Christian Gehrmann(2004), Bluetooth Security, Artech House Publishers Robert Morrow(2002), Bluetooth : Operation and Use, McGraw-Hill Professional (Telecommunications) Tom Siep (2000), An IEEE Guide: How to Find What You Need in the Bluetooth Spec, Institute of Electrical Online article: Pyramid Media Group, Inc Constantly Connected: Beyond WiFi and Bluetooth, http://www.findarticles.com/p/articles/mi_m0QXQ/is_2005_June_30/ai_n15341855 http://www.swedetrack.com/images/bluet00.htm Articles from magazines: Clive Akass (28 Jan, 2006), Bluetooth to hit 100Mbits/sec, Pc Magazine pp. 41-42 Michael Kwan (Thursday April 6, 2006), Jabra shows off Bluetooth goods at CTIA, Mobile Magazine pp. 23 Appendices: Appendix A: Survey on Bluetooth and its Impact on Society in the near future: Topic: Bluetooth and its impact on the society in the near future We are from EHM 3066 (Engineers and society) class. We are conducting a mini survey regarding the Bluetooth and its impact on society in the near future. Kindly spend a few minutes to answer this questionnaire. Your answers will be kept confidential. We would like to express our advanced gratitude for your co-operation. Instruction: Please TICK (v) in the appropriate boxes or write your responses in the given space: Survey on Bluetooth and its Impact on Society in the near future: We a group of students We would like to kindly invite you to participate in this survey to help us gain valuable information of the Blueooth and its impact on society in the near future. Please tick or write your responses in the given space. A- GENDER omale ofemale B- AGE o18-24 o25-30 o30-35 Other : ____ C- Occupation Do you have any Bluetooth-enabled device? oYes oNo If your answer is yes, what kind of device that you have is equipped with Bluetooth? oHand phone or Personal digital assistance (PDA) oLaptop oPersonal Computer o I dont have oOther : _________ how often do you use bluetooth? onever osometimes ooften oalways What kind of data/file that you use Bluetooth to transfer? oImage oMusic oDocument oSyncronisation Give your opinion on what impact of the Bluetooth on the societ is? Do you support the idea of installing Bluetooth devices in all computers in your company/university Computer Lab in order to increase the usage of Bluetooth? ?Yes ?No Have you known that Bluetooth-enabled devices are able to receive viruses and to get hacked? ?Yes ?No Have you ever got your Bluetooth-enabled device hacked by Bluetooth? ?Yes ?No Have you ever received unwanted data by unknown people ? ?Yes ?No How often do you get busy using Bluetooth to transfer data with another person in places such as classrooms or while you are driving? onever osometimes ooften oalways

Human Nature :: Sociology Sociological Papers

Human Nature A woman is screaming and the smell of a raging fire is in the air. There’s a group of people about fifteen yards away who are witnessing the event. They all stand there in awe of the destruction but not one of them has called the authorities. Jack, a businessman walking by himself, sees the fire and the woman trapped inside the building. Without hesitation he uses his cell phone to call the fire department. Once getting off the phone, this brave man runs into the smoldering building to try and save the woman. Coming out of the building without being harmed, he and the woman are safe. If one man could do this, why did the group of people watching not do anything? The explanation for the reactions of the people is due to what may be said as human nature. It seems that when in groups, people are less reactive when they are in the presence of danger or hazard. Carol Tavris, who received a Ph.D. in Social Psychology from the University of Michigan, is a widely published author. In her works, â€Å" In Groups We Shrink From Loner’s Heroics,† she talks about the human nature of people and how in groups, humans seem to â€Å"†¦think and act differently than they would on their own† (Tavris 17). When facing danger or disaster, groups of people do not run to the aid of others because of the nature of groups versus the nature of individuals (Tavris 18). Tavris is trying to reach everyone and have them be aware of what is human instinct versus what is moral. She is hoping that her readers will take something away with them from the article and hopefully react morally when seeing people in danger or in desperate need of help. Throughout her piece, Tavris uses two main structures: compare and contrast structure and the problem/solution structure. She uses these so that her readers can see the comparison or the solution right away. She very vividly shows the difference in the reactions of people when she uses the compare and contrast structure.

Business :: essays research papers

I own a local business that provides Internet access to individuals and businesses, my business is one of four businesses in the local market that provide internet access to both individuals and businesses. Each of the four businesses charges the same price of twelve dollars a month for unlimited dial up services. My businesses breakeven price is seven dollars per customer, so no matter what I must charge it least seven dollars per package in order to cover all my costs. Recently my business and the other three businesses have begun to enter into a price war, to ensure that my business isn’t destroyed I will have to develop specific pricing strategies based on certain situations brought upon by my competitors.   Ã‚  Ã‚  Ã‚  Ã‚  Demand for my businesses service is often fluctuating because of the constant price changing between my competitors and I. Demand for my service is affected by changes in prices because people are drawn more toward the lowest priced Internet service providers The provider that offers the most bonuses and upgrades along with a strategically low priced internet service, will most likely succeed in bringing in the most customers. Dramatic price drops by my competitors would make it hard for my business to stay afloat because my breakeven price is seven dollars per person, so if they drop their prices to seven dollars or less, then my business would probably have to close because of insufficient profits.   Ã‚  Ã‚  Ã‚  Ã‚  My business has three competitors selling the same service as I am, and most any of their business decisions can affect my business in either a positive or negative way. If those businesses are able to drop their prices and offer more extras with their Internet service than my business is able to, it could result in a dramatic loss of business for me and a gain of business for my competitors. The opposite could also occur, my competition could start losing profits and have to raise their prices to maintain operations. In this instance some of their customers might switch to my Internet provider so they wouldn’t have to pay higher prices. My customers who were previously thinking about switching to one of my competitors will now decide to stay with my business rather than switching to a provider with fluctuating prices.   Ã‚  Ã‚  Ã‚  Ã‚  Having too many of the same kinds of businesses (such as an internet service provider) in the same area, results in a loss of business for everyone because now consumers have so many options of which business to choose form. Business :: essays research papers I own a local business that provides Internet access to individuals and businesses, my business is one of four businesses in the local market that provide internet access to both individuals and businesses. Each of the four businesses charges the same price of twelve dollars a month for unlimited dial up services. My businesses breakeven price is seven dollars per customer, so no matter what I must charge it least seven dollars per package in order to cover all my costs. Recently my business and the other three businesses have begun to enter into a price war, to ensure that my business isn’t destroyed I will have to develop specific pricing strategies based on certain situations brought upon by my competitors.   Ã‚  Ã‚  Ã‚  Ã‚  Demand for my businesses service is often fluctuating because of the constant price changing between my competitors and I. Demand for my service is affected by changes in prices because people are drawn more toward the lowest priced Internet service providers The provider that offers the most bonuses and upgrades along with a strategically low priced internet service, will most likely succeed in bringing in the most customers. Dramatic price drops by my competitors would make it hard for my business to stay afloat because my breakeven price is seven dollars per person, so if they drop their prices to seven dollars or less, then my business would probably have to close because of insufficient profits.   Ã‚  Ã‚  Ã‚  Ã‚  My business has three competitors selling the same service as I am, and most any of their business decisions can affect my business in either a positive or negative way. If those businesses are able to drop their prices and offer more extras with their Internet service than my business is able to, it could result in a dramatic loss of business for me and a gain of business for my competitors. The opposite could also occur, my competition could start losing profits and have to raise their prices to maintain operations. In this instance some of their customers might switch to my Internet provider so they wouldn’t have to pay higher prices. My customers who were previously thinking about switching to one of my competitors will now decide to stay with my business rather than switching to a provider with fluctuating prices.   Ã‚  Ã‚  Ã‚  Ã‚  Having too many of the same kinds of businesses (such as an internet service provider) in the same area, results in a loss of business for everyone because now consumers have so many options of which business to choose form.

Try Something New for 30 Days

Try something new for 30 days. Do you believe that by doing something new for 30 days can change our life? Is this possible†¦? The great American philosopher Morgan Spurlock says that 30 day challenges or trying something new for those days will change our life. Matt Cutts was ordinary computer scientist who couldn’t make a progress in his life. Nevertheless, after reading this book he had learned many things and made changes in 30 days. The question is will his idea does work to everyone..? I like this ideas a lot and definitely support it in right way and I believe that 30 days are enough to make changes in our life.It is an opportunity to start something new, and try something that you always wanted to do. Perhaps, it is all about adding new or subtracting â€Å"bad† habits and trying to set a goal or plans to accomplish in 30 days. This article shows us how Matt has made his life better by doing simple changes. First, if we want to make our life better, we shou ld set positive goals, than move forward and work to add a new habit, than try to stop unhealthy behaviors and habits. It means that we need to make simple changes like Matt did. For example; he was a computer dupe, however he had tried new simple things in 30 day which he had never done.Certainly we also can do it and make a better life. The best way to do these 30 day s challenges is to understand what we really want, than to be in the mood of it, and last thing is just start it. As a result it will give us many positive benefits. Furthermore, people can force their self to do many activities and become an organized. People who have bad habits as a smoking or drinking can change it by adding a new one. Smoking may replaced by some healthy foods. Consequently those changes can give an opportunity to keep their money also their health.Second is adding new habits, it can be everything which people have always wanted to do, however in 30 days it might change their life. I had a friend , who had no idea about music, but he has started to sing and singing became his habit. Now he is making good music career. In conclusion I would like to mention that many people fare afraid to do something new, because they got accustomed to these things. However Matts article motivated us to do something new by giving his advices and examples from his live. We can use his idea to control our goal, to schedule tasks and projects and make our life better.

Mise en Scene in Nosferatu Essay

F.W. Murnau’s â€Å"Nosferatu† is a classic visual tale of Bram Stoker’s â€Å"Dracula†. The silent film is filled with obsession and lust, surrealism as well as the prosaic theme of good versus evil. The film recounts the tale of Hutter, a real estate agent hungry for money, and his journey to vampire Count Orlak’s mansion, as well as the twists and turns found heavily within the scenes. Nosferatu (Count Orlak’s alter ego) falls for Hutter’s wife and moves in to the residence next door to the couple, where a series of events occur that would ultimately lead to the fanged beast’s demise. Mis en scene is a pivotal element throughout the film, especially for expressionist director Murnau, whose natural take on frightening the audience with the use of lighting, camera angles and framing supersedes that of directors who emphasize the huge props or costumes. The director’s excessive use of shadows is a tool used in order to make the events happening throughout the film become more realistic, as well as typifies the evil located in the character of Nosferatu. Cast shadows can be seen throughout the film and all is due to the lighting Murnau chose to give. For example, in among the last scenes of the movie, we see Ellen lying in bed with Nosferatu’s shadow casting above her. This take on camera angle and lighting is especially important as it sums up one of the main motifs, lust. Ellen does not struggle under the dominance of the Count, nor does she fear for her life, rather on the contrary she is offering herself to him and she likes it. This erotic interpretation can be splintered down to the way the director played with the setting. Ellen’s body is clearly brighter than her surroundings, which also reinforces the eroticism of her movements. Also, Nosferatu’s shadow is bigger than it is in any other scene, which allows the audience to feel that at that moment evil is the strongest, and the most powerful. Setting is a very crucial and profound constituent in the cinema, even more important than actors at times. Nature plays the role of symbolizing all that we cannot see through the character’s actions and through the plots words and scripting. Here, nature expresses the hardships and obstacles that reflect upon the emotions of Hutter, Ellen and Nosferatu. During Hutter’s first journey, it is calm and beautiful. However, during his travel back home, it becomes chaotic and disturbing. The instances when the nature  prevents Hutter from moving further arguably begin to show the paranormal side nature is supporting, for example, the river is filled with rocks, which makes it difficult for him to pass; the trees seem very chaotic, the wind is always coming towards him. The scene where Ellen is by the seashore, the sea seems wild and angry. The viewer also knows that it will bring Nosferatu to her too. The environment is helpful only when Nosferatu is around. The sea always seems calm while he is sailing the ship. Other scenes, where elements of nature such as creatures and plants are shown as ghosts or blood-suckers expose the alliance between the vampire and the elements of the Earth. This shows not only the power Nosferatu harbors within him, but that nature is well and truly an antagonist in this depiction of a vampire’s tale. Probably one of the biggest and most important quotes in the movie has been dropped near the beginning, as Hutter runs to his workplace and is stopped by the professor exclaiming â€Å"Wait, young man. You can’t escape your destiny by running away†¦Ã¢â‚¬  This line allowed the audience to begin thinking and to start connecting the limited amount of dots that have been given to us so early in the movie. We know that Nosferatu exists, and that something bad is going to happen to the protagonist, or the character the audience most identifies with. Such a saying would infer that no matter what Hutter did, destiny has already scripted his actions and what is yet to come. The mis en scene parallels the saying in a very subtle way as during the scenes in which Hutter is on his journey to the count, he always seems to be entering the picture, rather than the camera following him. This shows that no matter where he went, it was always predestined for him. Another tell was the clock that kept appearing, not only to give the viewer an idea of the setting but also to show that time is running out and destiny is knocking at the door. Alternatively, a redundant word that was used throughout the film was â€Å"Hurry!† which gave away two aspects in the film. The first that no matter how much you hurry, destiny will always be on the corner, and second it pinpoints at Hutter’s hyper actions and the way he is always in a rush. This can also be boiled down to the editing that slightly speeded up the movie in order to give an eerie vibe to the already paranormal state of the world the characters live in. The film’s camera angles also capture the audiences’ attention without them even knowing. Throughout the movie, Murnau’s choice  of camera angles had not only connected the viewer with the characters, but also connected the characters to one another. In many of the scenes where Hutter encounters the great Nosferatu, the camera angle shows the events occurring in the scene from the protagonist’s point of view, that way the audiences become one with the character, allowing them to see exactly as he does, thus realistically flowing the fear through them and connecting them with him. In other acts, Ellen would be at the seashore awaiting her beloved (but who?) and she would be pointing to the horizon, at the very same moment camera cuts to the ship Nosferatu is sailing and we can see the bow of the ship is pointing â€Å"towards† Ellen. This technique found in movies sanctions the spectators to see the small influences the characters have on each other, no matter where they may be. The movie’s total ambiance and mis en scene are vastly superior to that of the plot and acting, to such a level as to allow the cinema world to dissect the film piece by and study from the inspiring and largely accredited director Murnau, whose expressionist views and interpretations made the classic â€Å"A Symphony of Horrors† is today. With mis en scene and camera angles, as well as lighting and setting, Murnau combined so delicately as to achieve this work of art that shall be studied for years to come.

The Sovietisation of Eastern Europe 1945-1968

Sovietisation of Eastern Europe 1945-1968 World war two saw a grand alliance of Britain, America and Russia created in order to defeat their common enemy, Adolf Hitler. In pursuit of this goal they attended a number of conferences to plan their attacks and to decide on the future of post war Europe. At Teheran in 1943 Churchill voiced concerns about the post-war situation in Eastern Europe, he was afraid that victory over the Nazis would leave the USSR in control of Eastern Europe.To prevent this from happening he proposed that the Anglo-American’s open up a second front in the Balkans. Stalin rejected this proposal as he knew it would thwart his plan to extend his ‘sphere of influence’ in Eastern Europe after the war, and insisted the second front be opened in France. The war in Europe was nearly over when the allied leaders met at Yalta. While there was general agreement on how to deal with Germany, Churchill and Stalin had different ideas when it came to Poland .Stalin wanted the communist-dominated Lubin committee to form the new government, whereas Churchill spoke out in favour of the London based Polish government in exile. It was agreed that a coalition government would be created but no decision was made on where Poland’s borders would be drawn after the war. The question of Poland was raised again at Potsdam. Stalin got two leaders to accept the Lubin government but he promised that after the war free elections would be held. Moscow saw control of Eastern Europe as essential to soviet security.Stalin had lived through two German invasions of his country and he was determined that the USSR would never again face the threat of invasion from the West. He believed that if the counties to the west of the USSR were ‘friendly’ they would act as a ‘buffer zone’ between the USSR and Western Europe. However as the ‘grand alliance’ had disintegrated and the Cold War intensified Stalin presses on wit h his plan which usually involved three stages. In Poland, after the war, sixteen of the twenty five members of the Polish government were communists.This resulted in an intense power struggle between the communists and the more popular Peasants Party and Socialist Party. While Stalin had promised that the elections would be free and fair, they were anything but. In the 1947 election the communists won 80% of the vote and a one-party communist state was created. The Catholic Church became the main opposition voice in Poland with Cardinal Wyszynski imprisoned for his support of resistance groups. Despite this, the sovietisation of Poland lasted 40 years.In Hungary the communists initially formed only a small part of a national government after the war. In the 1945 election the communists only won 17% of the vote while the Smallholders Party won 60%. However, under pressure from the Soviet Union the PM Tidly was forced to appoint a communist Rakosi as his deputy and Rajk as minister o f the interior, latter position meant that the communists controlled the police and the legal system and they used this to terrorise members of the opposition parties.In the 1947 election the communists won 24% of the vote but by merging with the social Democrats they were able to get the Parliament to pass a new constitution in 1949. The coalition government in Czechoslovakia lasted longer than in other eastern bloc countries. The democratic parties held the majority in this government with Benes as president and Jan Masaryk as Foreign Minister. However as had happened in other eastern bloc countries a communist, Gottwald, was appointed PM and they also controlled the Ministry of the Interior.Benes hoped to establish Czechoslovakia as a ‘bridge’ between East and West, capable of maintaining contact with both sides and so in 1948 hoped to participate in the Marshall Plan. This resulted in a coup by the communist party with the help of the red army and on the 9th of May a new constitution was introduced which created a soviet-style government. Stalin proceeded to tighten his grip on East Germany and trouble erupted in berlin in 1930 when the government demaned extra productivity from the workers.